Abocom MH200 manual Step

Page 11

STEP 5:

The configuration is successful if you see the screen below. Make sure that all the computers that are connected to the LAN port have their Default Gateway IP Address set to the Multi-Homing’s LAN IP Address (i.e. 192.168.1.1). At this point, all the computers on the LAN network should gain access to Internet immediately. If a Multi-Homing filter function is required, please refer to the Policy section.

- 10-

Image 11

Contents Multi-Homing Dual WAN Firewall Router Multi-Homing Dual WAN Firewall Router monitoring function Multi-Homing Dual WAN Firewall Router security featureMulti-Homing Dual WAN Firewall Router installation Multi-Homing Dual WAN Firewall Router function settingMulti-Homing Dual WAN Firewall Router supporting protocols Hardware DescriptionMulti-Homing Connecting ExamplePage Quick Setup Username admin Password admin Click OK LAN interface Click Modify to modify WAN 1/2 settings Click on OK to apply the changes Step