Actiontec USB/Ethernet DSL Modem User Manual
DSL Settings
To access DSL Settings, select DSL Settings from the “Utilities” screen. The Modem’s VPI, VCI, and Mode settings can be changed from this screen. Actiontec recommends not changing these values without consulting the ISP.
Restore Default Settings
To restore the Modem to its factory default settings, select Restore Default Settings from the “Utilities” screen. When the “Restore Default Settings” screen appears, click Restore Default Settings. Any changes made to the Modem’s settings in the Custom Setup screens will be lost and the factory default settings will be restored. During this process, the Modem’s power LED flashes and the Modem is disabled.
Warning: Do not unplug the power cord from the Modem dur- ing the Restore Default Settings process. Doing so may result in permanent damage to the Modem.
When the Power LED stops flashing and glows steadily green, the Modem is fully operational.
44