Service aggregation and networking

The ASAP adapter card supports ATM, inverse multiplexing over ATM (IMA), TDM and MLPPP. The Ethernet adapter card has six ports of auto-sensing 10/100 Base-T ports plus two further ports supporting 10/100/1000 Base TX with small form factor pluggable (SFPs) optics. Each slot is connected to the switching fabric on the CSM via a 1 Gb/s link to host existing and future interface types.

To provide the most efficient transport solution, the Alcatel-Lucent 7705 SAR employs pseudowire encapsulation (PWE3) methods to map services end to end. The use of pseudowires ensures that the key attributes of the service are maintained, while using a cost- effective packet environment to aggregate services.

The Alcatel-Lucent 7705 SAR supports RFC 5086 — Structure-Aware Time Division Multiplexed (TDM) Circuit Emulation Service over Packet Switched Network (CESoPSN) for the encapsu lation and transport of TDM traffic, for example, 2G TDM services. The use of circuit emulation service (CES) ensures that only the active timeslots are transported, keeping bandwidth usage to a minimum. The Alcatel-Lucent 7705 SAR also supports RFC 4717 — Encapsu lation Methods for Transport of

Asynchronous Transfer Mode (ATM) over MPLS Networks (also known as draft-ietf-pwe3-atm-encap). The Alcatel-Lucent 7705 SAR supports N:1 cell mode for transport of ATM-based services. Multiple access ATM ports are bundled together to attain higher speeds using IMA. The IMA protocol is terminated on the Alcatel-Lucent 7705 SAR and only the cells containing user data belonging to a virtual circuit/virtual path (VC/VP) structure are transported.

In addition, the Alcatel-Lucent 7705 SAR supports RFC 4448 — Encapsu lation Methods for Transport of Ethernet over MPLS Networks, which specifies how Ethernet pseudowires can be used to transport Ethernet traffic across the packet network. To offer greater scalability, all the traffic out of an Ethernet port can be carried over a single Ethernet pseudowire or, alternatively, a pseudowire can be created for each VLAN that is assigned to a different service or end-customer. When dynamic signaling is deployed, the end-to-end pseudowire is estab- lished using targeted label distribution protocol (T-LDP) and the MPLS tunnel via LDP. In addition to efficient LDP-based dynamic signaling, static provisioning of both the MPLS tunnel and the pseudowire is also supported.

Quality of service and traffic management

It is critical to maintain the end-to-end quality of service (QoS) for packet traffic. Not all types of traffic have the same set of requirements. Voice traffic in particular requires low latency and jitter (latency variation) and also low loss, whereas data traffic often has less stringent delay requirements but may be very sensitive to loss, as packet loss can seriously constrain applica tion throughput. To offer the req uired treatment throughout the network, traffic flows with different requirements are identified at the access and marked in-line with the appropriate QoS metrics. Traffic classification and marking is carried out based on the following:

Classification (Layer 1/Layer 2/Layer

2.5and/or Layer 3 header):

• Timeslot/port

• Ethernet port/VLAN

•ATM service category

(CBR/rt-VBR/nrt-VBR/UBR)

•ATM VC

•Ethernet 802.1p/VLAN

•IP DSCP/MPLS EXP

Marking:

•Layer 2 (802.1p)

•Layer 2.5 (EXP) both for tunnel and PWE3

•Layer 3 (DiffServ)

Figure 1. Low-cost, high-quality backhaul using MPLS pseudowires

Cell Site

BTS	TDM
BTS
	ATM	7705
Node B		7705
Node B		SAR
	Ethernet	SAR
	Ethernet
Telemetry

7705 SAR

Ethernet, MLPPP

		MTSO
		TDM
PSN/Metro Ethernet/	Ethernet, MLPPP	ATM	BSC
SONET/SDH		Ethernet
		Ethernet
		7710/7750 SR,	RNC
		7670 RSP	RNC

TDM Pseudowire

MPLS Tunnel

ATM Pseudowire

Ethernet Pseudowire

MPLS Pseudowires Allow Convergence and Dynamic Bandwidth Allocation

Over Multiple Media, Enabling Low Cost Backhaul

2 Alcatel-Lucent 7705 SAR Data Sheet

7705 SAR specifications

The Alcatel-Lucent 7705 Service Aggregation Router (SAR) is a robust network device designed to address the demands of modern service providers, enterprises, and data centers. As a part of Nokia's Alcatel-Lucent portfolio, the 7705 SAR offers a versatile and efficient solution for service aggregation in both fixed and mobile environments.

One of the standout features of the 7705 SAR is its flexibility. It is designed to support a multitude of applications including IP/MPLS, Ethernet services, and IP routing. This adaptability makes it an ideal choice for various deployment scenarios, including backhaul for mobile networks, aggregation for fixed network services, and even transport for cloud-based solutions.

In terms of capacity and performance, the 7705 SAR is equipped with high-density interfaces, capable of handling a range of speeds from 10 Mbps to 100 Gbps. This scalability ensures that service providers can easily accommodate growing bandwidth demands while maintaining high levels of service quality.

The 7705 SAR supports a comprehensive set of technologies that enhance its functionality. For instance, it is designed to work seamlessly with MPLS (Multiprotocol Label Switching) to optimize traffic flows and ensure efficient use of network resources. Furthermore, the SAR’s support for virtual private networks (VPN) allows for secure data transport over shared networks, making it beneficial for enterprises looking to safeguard sensitive information.

Quality of Service (QoS) capabilities is another noteworthy characteristic of the 7705 SAR, providing operators the ability to prioritize different types of traffic. This is crucial for maintaining service quality, especially in environments with mixed traffic including voice, video, and data.

The router also boasts advanced network management features, enabling operators to monitor network performance, diagnose issues, and implement policy changes swiftly. Its support for automation enhances operational efficiency, which is increasingly vital in today's fast-paced digital landscape.

Additionally, the device supports a wide range of network protocols and standards, ensuring compatibility and interoperability with existing infrastructure. Its compact design and power efficiency further enable cost-effective deployment in diverse environments.

Overall, the Alcatel-Lucent 7705 SAR stands out as a state-of-the-art service aggregation solution that empowers network operators to deliver high-quality services efficiently and effectively. Its combination of flexibility, performance, and comprehensive feature set makes it a valuable asset in the ever-evolving telecommunications landscape.