GE PSD300, PSD330 Stained tub interior, Dishes don’t dry, Dishes and flatware, not clean, Problem

Problem	Possible Causes	What To Do
Stained tub interior	Detergent with	• Some detergents contain
	colorant was used	colorant (pigment or dyes)
		that will discolor the tub
		interior with extended use.
		Check the detergent cup
		for signs of any
		discoloration. If cup is
		discolored, change to
		detergent without any
		colorant. Cascade®
		Automatic Dishwashing
		Detergent has been
		approved for use in all
		GE dishwashers.
	Some tomato-based	• Use of the RINSE & HOLD
	foods can stain	cycle (on some models)
		after adding the dish to the
		load can decrease the level
		of staining.
Dishes don’t dry	Low inlet water	• Make sure inlet water
	temperature	temperature is correct.
	Rinse agent dispenser	• Check the rinse agent
	is empty	dispenser.
Dishes and flatware	Inlet water temperature	• Raise the water heater
not clean	is below 120°F.	temperature to 120°F.
	Water pressure is	• Turn on a faucet. Is water
	temporarily low	coming out more slowly
		than usual? If so, wait until
		pressure is normal before
		using your dishwasher.
	Air gap is clogged	• Clean the air gap.
	Improper rack loading	• Make sure large dishware
		does not block the
		detergent dispenser or the
		wash arm.

Safety Information

Operating Instructions

Troubleshooting Tips

Customer Service

23