GE PSD900 Control Settings, Cycles, Options, Start, Safety Information, Operating Instructions

Control Settings

1 Cycles

POTS & PANS For heavily soiled dishes or cookware with dried-on or baked-on soils. Everyday dishes may be included. This cycle will not remove burned-on foods.

NORMAL WASH For loads of everyday dishes, glasses and cookware with medium soils. NOTE: Many dishes have lighter soil than normal. Choosing a cycle other than NORMAL WASH will save energy and water.

LIGHT WASH/ For dishes with light soils.

WATER SAVER

RINSE & HOLD For rinsing partial loads that will be washed later. Do not use detergent.

PLATE WARMER For warming clean dishes and serving plates. This cycle will take approximately 32 minutes.

■Make sure the Dial is at the OFF position.

■Latch the door.

2 Options

WASH TEMP Provides extra heat for best performance. It is used BOOST ON/ best with heavily-soiled dishes.

HEATED WASHWASH TEMP Turns WASH TEMP BOOST off.BOOST OFF

HEATED DRY Turns the drying heater on for fast drying. This cycle ON/ HEATED will extend the time to your wash cycle.

DRY

HEATED DRY Shuts off the drying heat option. Dishes air dry

OFF naturally and energy is saved.

ENERGY SAVER Turns all Options off.

3 Start

Slowly turn the Dial to the START or ON position. Don’t turn it past the START or ON position, or you could accidentally miss a rinse. There is a time delay between start-up and water fill so you will not hear any wash action right away.

Safety Information

Operating Instructions

Troubleshooting Tips

Customer Service

9