Airlink101 ASW324V2 manual Rack Installation, Power on the Switch

2.3 Rack Installation

The Switch is rack-mountable and can be installed on an EIA 11-inch equipment rack. To do this, first install the mounting brackets on the Switch’s side panels (one on each side), secure them with the included screws, and then use the screws provided with the equipment rack to mount the Switch.

2.4 Power on the Switch

The Switch has a universal power supply ranging from 100V to 240V AC, 50 ~ 60Hz power source. The AC power connector is located at the rear of the unit. The Switch’s power supply will adjust to the local power source automatically.

7