Airlink101 AR430W user manual Wireless Security, Encryption Choose from 64 bits or 128 bits

6.2.2 Wireless Security

You can configure wireless security such as WEP or WPA encryption on this screen.

Note: It is recommended that you use WPA-PSK or WPA2-PSK encryption over WEP if your wireless clients support it. All of the wireless clients must use the same security settings in order to connect to the router.

WEP

To enable WEP, select WEP from the Security Mode.

Authentication Type: Choose Open System or Shared Key.

Encryption: Choose from 64 bits or 128 bits

Key Type: Choose HEX or ASCII

WEP Key 1 – 4: Manually assign a password for each key. If you selected 64 bits encryption, enter 10 HEX characters (0-F) for each key. If you selected 128 bits encryption, enter 26 HEX characters (0-F) for each key.

17