Airlink101 AR430W user manual Security Firewall, VPN Passthrough

Page 22

6.3Security

6.3.1 Firewall

Block WAN Ping: Enable or Disable.

SPI Mode: Select to enable or disable Stateful Packet Inspection. Click Apply and OK to save the setting.

6.3.2 VPN Passthrough

You can select to enable or disable the passthrough of IPSec, L2TP, and/or PPTP.

Click Apply and OK to save the setting.

22

Image 22

Contents Ver a Table of Contents Introduction Connecting the Router Verifying Connection to the Router Page Page Configuring the Router DSL Example username@sbcglobal.net Ssid default Connecting to the Router WirelesslyWEP disabled Web Configuration Utility Setup Internet SetupNetwork Setup Assigning Static Dhcp SettingsDdns Time Settings Wireless Basic Wireless Settings Wireless Security Encryption Choose from 64 bits or 128 bitsWPA WiFi Protected Setup Wireless MAC Filter Advanced Wireless Settings Security Firewall VPN PassthroughAccess Restrictions IP FiltersMAC Filters URL Blocking Domain Blocking Schedule TimeApplications & Gaming Port Range Forwarding Port Range Triggering 3 DMZ Administration Management 2 Log Diagnostics Factory Defaults Firmware Upgrade Restart Status Router Local Network Wireless Network Troubleshooting Technical Support Mailsupport@airlink101.com