Aiphone Installation Manual for HID Proximity Card Reader and GT Programming

HID Proximity Card Reader Module for GT Entrance Panel

- INSTRUCTIONS -

The GT-HID is an Access Control module for the GT Entrance Panel that contains an HID ProxPoint® Plus Card Reader. This module installs into the entrance panel and cosmetically matches, so a separate card reader does not need to be installed. The card reader provides electronic access to a building through the standard Access Control system, which is not supplied by Aiphone.

INSTALLATION:

1.Install GT-HID card reader module in the GT entrance panel. (Install in a lower position for ease of access).

2.GT-HID will snap into the GF-2F or GF-3F frame.

3.Secure wire connections as shown on wiring chart.

4.Cut any unused wire so that bare wires are not exposed.

5.Refer to standard GT Installation Manual for complete system information. No additional information pertaining to the Access Control system is provided by Aiphone.

GT-HID

(front view)

LED indicator

Connecting the Reader to the Host:

Connect the reader to the host according to the wiring table below and the host installation guide.

GT-HID

(back view)

Wiegand	Wire Color
+ DC	Red
Ground	Black

---Violet

Data0 Green

Data1 White Shield Ground Drain

Green LED	Orange
Red LED	Brown
Beeper	Yellow
Hold	Blue

18" pigtail cable

To Host

Page 1