TYPICAL LAYOUTS: |
|
|
|
|
|
1 | 2 | 3 | 1 | 2 | 3 |
4 | 5 | 6 | 4 | 5 | 6 |
7 | 8 | 9 | 7 | 8 | 9 |
* | 0 | # | * | 0 | # |
|
|
|
|
|
| Video with 4 buttons and | Digital audio with card reader |
|
| |||||
|
|
|
|
|
| card reader |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Audio with 4 buttons |
|
| Digital video with card | |||||||||||
and card reader |
|
| reader | |||||||||||
TESTING AND OPERATION:
When power is applied to the reader, the LED will flash green three (3) times while the beeper beeps simultaneously. The LED will then turn red. This indicates that the microcontroller is operating properly.
Present an ID card to the reader. (Hold card directly in front of reader module.) The LED will momentarily turn green while the beeper beeps once, indicating that the card was read successfully.
SPECIFICATIONS: |
|
Model #: | HID 6005B |
Power Source: | 5.0 – 16.0 VDC |
Absolute Max. Voltage: | 18 VDC |
Peak Current: | 80 mA |
Avg. Current 5V or 12V: | 20 mA |
Terminations: | |
Wiring Distance: | 500' |
Dimensions (H x W x D): | 3 ¾” x 4 3/16" x 1 7/8" |
Operating Temperature: |
FCC WARNING:
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference that may cause undesired operation.
For proper regulatory compliance, the drain wire should be disconnected at the power supply end of the cable.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The Reader is intended to be powered from a limited power source output of a previously certified power supply.
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) | TOLL FREE TECHNICAL SUPPORT: (800) | ||
FAX (425) | |||
0912PHJD |