Airlink101 AR725W user manual Network Setup, Router IP, Dhcp Server Setting

Network Setup

Router IP

You can change the Router’s IP Address and its Subnet Mask.

DHCP Server Setting

The Router has a built-in DHCP server which can dynamically assign IP address to each device on your network. The DHCP Server is Enabled by default, if you already have a DHCP server on the network, you need to select Disabled.

Start IP Address: Give a value for the dynamically assigning IP address to start with. Because the Router’s default IP address is 192.168.1.1, the Starting IP Address must be 192.168.1.2 or greater, but smaller than 192.168.1.253. The default Starting IP Address is 192.168.1.100.

Maximum Number of Users: Enter the maximum number of PCs that you want the DHCP server to assign IP addresses to. This number cannot be greater than 253. The default is 50.

Client Lease Time: The Client Lease Time is the amount of time a network user will be allowed connection to the Router with their current dynamic IP address.

Static DNS 1~3: Enter up to 3 DNS addresses for your network.

DHCP Reservation: If you want to assign a static IP Address to one of the computers in your network, click on the DHCP Reservation button.

14