ADTRAN 4305 Enable Telnet Access, Console Pinouts, Ethernet Pinout, Configure Your Application

Page 2

®

Quick Start Guide

 

For more detailed documentation, visit us online at www.adtran.com.

NetVanta 4305 Router

P/N 1200890L2

 

 

 

 

 

 

 

 

ETH 0/2

100-250VAC, 0.75A

 

WAN-T1

DSX-1

DBU

WAN-T1

DSX-1

DBU

50/60Hz

 

 

 

WAN-T1

DSX-1

DBU

 

 

 

 

CONSOLE

 

 

 

 

 

 

 

SLOT 3 WIDE MODULE

SLOT 2 NET/DBU

SLOT 1 NET/DBU

ETH 0/1

 

ENABLE TELNET ACCESS

The following steps create a password of adtran for Telnet access. By default, Telnet access is enabled with a password of password.

1.Verify that the prompt of your unit displays (config)#.

2.Enter line telnet 0 4 to change the configuration parameters for the Telnet sessions.

3.Enter login to initiate Telnet access.

4.Enter password adtran to change the login password for the Telnet sessions.

5.Enter exit to return to the Global Configuration mode.

6.Verify that the prompt of your unit displays (config)#.

7.Enter do write memory to save the current configuration.

CONSOLE PINOUTS

Pin

Name

Description

 

 

 

1

DCD

Data Carrier Detect (output)

2

RD

Receive Data (output)

3

TD

Transmit Data (input)

4

DTR

Data Terminal Ready (input)

5

SG

Signal Ground

6

DSR

Data Set Ready (output)

7

Unused

8

CTS

Clear to Send (output)

9

Unused

For information on installing the VPN Accelerator Card, please refer to the NetVanta 4305 Hardware Installation Guide on the ADTRAN OS System Documentation CD included in your router shipment.

ETHERNET PINOUT

Pin

Name

Description

 

 

 

1

TX1

Transmit Positive

2

TX2

Transmit Negative

3

RX1

Receive Positive

4, 5

Unused

6

RX2

Receive Negative

7, 8

Unused

CONFIGURE YOUR APPLICATION

More detailed documentation for configuring your ADTRAN unit is provided on the ADTRAN OS System Documentation CD included in your shipment. For more detail on hardware setup, refer to the appropriate NIM Quick Start Guides and the Hardware Installation Guide. For more detail on configuring your system, refer to the ADTRAN Operating System (AOS) Command Reference Guide, configuration guides, and technical support notes.

Important: For additional details on product features, specifications, installation, and safety, refer to the appropriate Hardware Installation Guide on the ADTRAN OS System Documentation CD shipped with the base unit and available online at www.adtran.com.

Quick Start Guide, 61200890L1-13D, July 2005

Technical Support 1-888-4ADTRAN (1-888-423-8726)

Copyright © 2005 ADTRAN, All Rights Reserved

Image 2
Contents Configure the UNIT’S IP Address Access the GUIAccess the CLI Getting StartedConsole Pinouts Enable Telnet AccessConfigure Your Application Ethernet Pinout