12 | Patch Release Note |
PCR: 01131 | Module: CORE | Network affecting: No |
The SHOW CPU command sometimes displayed incorrect CPU utilisation figures. Typically a value of about 74% was reported when in fact the CPU was almost idle. This issue has been resolved.
PCR: 01134 | Module: GUI | Network affecting: No |
Port parameters can now be set correctly using the Layer 3 Switch GUI.
PCR: 01135 | Module: GUI,INST | Network affecting: No |
Clicking the Apply button on a Layer 3 Switch GUI page caused the switch to lock up if no configuration file was set, but boot.cfg was present. This issue has been resolved.
PCR: 01137 | Module: IPG | Network affecting: No |
A fatal error occurred when UDP received a packet with very long UDP packet length. This issue has been resolved.
Features in 86222-01
Patch file details for Patch 86222-01 are listed in Table 10.
Table 10: Patch file details for Patch
Base Software Release File | |
|
|
Patch Release Date | |
|
|
Compressed Patch File Name | |
|
|
Compressed Patch File Size | 187124 bytes |
|
|
Patch
PCR: 01100 Module: DHCP | Network affecting: No |
The DHCP server identified the wrong port numbers for incoming DHCP requests causing DHCP replies to be sent to the wrong port. This issued has been resolved.
PCR: 01102 | Module: IPG | Network affecting: No |
The IP flow cache occasionally generated a watchdog fatal error. This issued has been resolved.
PCR: 01102 | Module: SWI | Network affecting: No |
Deleting entries from an L3 table occasionally resulted in a watchdog fatal error. This issued has been resolved.
PCR: 01106 | Module: PKI | Network affecting: No |
PKI enrolment no longer causes message validation to fail.
Patch