6Patch Release Note
PCR: 01150 | Module: FIREWALL | Network affecting: No |
The entry aging process now works correctly even when there are large | ||
numbers of firewall entries to be aged. |
| |
PCR: 01153 | Module: IPG | Network affecting: No |
The command SHOW IP DEBUG=n was entered, where n was one greater than the number of items in the IP debug queue resulted in a fatal error. This issue has been resolved.
Features in 86222-02
Patch file details for Patch 86222-02 are listed in Table 5.
Table 5: Patch file details for Patch
Base Software Release File | |
|
|
Patch Release Date | |
|
|
Compressed Patch File Name | |
|
|
Compressed Patch File Size | 202564 bytes |
|
|
Patch
PCR: 01081 | Module: FIREWALL | Network affecting: No |
When an interface on the firewall was configured with a global IP address of 0.0.0.0, outgoing packets from the private interface to the public interface sometimes caused a fatal error. This issue has been resolved.
PCR: 01126 | Module: PKI | Network affecting: No |
PCR: 01128 | Module: IPG | Network affecting: No |
A fatal error occurred when IGMP received a Join message and attempted to forward the Join message to other switch ports. This issue has been resolved.
PCR: 01131 | Module: CORE | Network affecting: No |
The SHOW CPU command sometimes displayed incorrect CPU utilisation figures. Typically a value of about 74% was reported when in fact the CPU was almost idle. This issue has been resolved.
PCR: 01134 | Module: GUI | Network affecting: No |
Port parameters can now be set correctly using the Layer 3 Switch GUI.
PCR: 01135 | Module: GUI,INST | Network affecting: No |
Clicking the Apply button on a Layer 3 Switch GUI page caused the switch to lock up if no configuration file was set, but boot.cfg was present. This issue has been resolved.
Patch