Allied Telesis X8100 Related How To Notes, Which products and software version does it apply to?

Page 3

 

Introduction

BGP: Route Map Filtering Example

48

BGP configuration

48

Route map configuration

48

OSPF: Configuring Route Maps for Filtering and Modifying OSPF Routes

50

Configuring a match clause

50

Configuring a set clause

51

OSPF: Applying Route Maps

52

Related How To Notes

You can also configure route maps on routers and switches running AlliedWare. For details, see the AlliedWare Note How To Use Route Maps and Other Filters to Filter and Alter BGP and OSPF Routes. This Note is available from www.alliedtelesis.com/resources/literature/ howto.aspx.

Which products and software version does it apply to?

This configuration applies to AlliedWare Plus software version 5.2.2-0.4 and above, for the following Allied Telesis switches:

SwitchBlade x8100 (CFC400, CFC960)

SwitchBlade x908 and SBx908 Extended

x600 and x610 Series Switches

x900 Series switches

Note: This document is a revision of an AlliedWare document, and also applies to the following AlliedWare products and software versions.

AlliedWare Products: AR440S, AR441S, AR450S, AR725, AR745, AR750S, Rapier i series, AT-8800 series, AT-9800 series, AT-8948, AT-9924T, AT-9924SP, AT-9924T/4SP, AT-9924Ts, x900 series.

AlliedWare Software version: 2.7.4 and above.

Use Route Maps and Other Filters to Filter and Alter BGP and OSPF Routes Page 3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Technical Guide IntroductionBGP Applying Route Maps to Imported Routes ContentsIntroduction Which products and software version does it apply to?Which products and software version does it apply to? Related How To NotesBGP updates BGP Concepts and TerminologyBGP peers Next-hop Update attributesOrigin AS-pathDistribute filters Access Control List ACL filtersBGP Overview of the Available Filter Types Filter typesDifference and Relationship in BGP Examples for filtering BGP Update messages Example AS path filters on page  Example Prefix filters on page Hierarchy of the Different FiltersBGP Example  Example Distribute filters on pageBasic configuration Confirming the neighbor relationship AlliedWare switchawplus#show ip route About ACLs BGP Configuring Distribute FiltersUsing ACLs as filters Example Distribute filtersFilter out one particular route from a neighbor Filter out a range of prefix lengths awplusconfig# neighbor 45.45.45.46 distribute-list list2 in 3. Check that the IP route table now includes all the routes6. Shut down the neighbor, and then bring it up again Use a numbered ACL instead of a named ACL 4. Check that the IP route table no longer includes 52.0.0.0/8 AS path lists BGP Configuring AS Path FiltersUsing AS path lists as path filters Example AS path filtersDiscard or allow routes from a neighbor 4. Shut down the neighbor, and then bring it up again a neighbor7. Shut down the neighbor, and then bring it up again An outgoing filter that uses an AS-path list Another exampleBGP Configuring AS Path Filters BGP Configuring Prefix Filters About prefix listsMask length awplusconfig-router# neighbor neighbor prefix-list list-name out Using prefix lists as prefix filtersExample Prefix filters awplusconfig-router# neighbor neighbor prefix-list list-name inFilter out a range of different prefix lengths awplusconfig-router# do show ip route Structure of a route map BGP Configuring Route MapsConfiguring a match clause ClausesAn AS path list Case A community listOne or more prefixes, by using an ACL One or more prefixes, by using a prefix listA metric the MED attribute Configuring a set clauseA next hop address An originset community community-values additive set ip next-hop ipadd set weightset atomic-aggregate set extcommunity rtsoo ext-comm-numberA match clause and one or more set clauses The effect of different combinations of clausesOne match clause with an action No match clause and one or more set clausesRouter AS Update from PeerUpdate 1 to Peer Update 2 to PeerFirst, enter BGP router mode for the AS. The prompt should look like awplusconfig-route-map#set metric ExamplesExample B Match on a prefix-list that denies an entry awplusconfig#ip prefix-list test1 permit 52.0.0.0/84. Apply this route map as the in route map on the neighbor awplusconfig-route-map#router bgp Example D Matching on a next-hop prefix-listExample E Prepending AS numbers awplusconfig-route-map#match ip addressset bgp peer=45.45.45.45 outroutemap=com sendcommunity=yes 1. Configure the AW peer to send out a community numberThe routes coming from that peer has community add ip routem=com entry=1 set commmun=8989BGP#show ip route set bgp peer=45.45.45.45 outroutemap=mixed sendcommunity=yes 8. Add that ACL as a distribute-list in-filter on the neighbor route-map marker permit Examples Route maps ACLs Path filters Prefix filtersSyntax BGP Applying Route Maps to Imported Routesnetwork neighbor default-originateOther Uses of Route Maps neighbor unsuppress-mapBGP configuration Route map configurationBGP Route Map Filtering Example set local-preference route-map outdef permit OSPF Configuring Route Maps for Filtering and Modifying OSPF Routes MetricInterface A prefix, by using a prefix list A prefix, by using an ACLExternal route type  Set the metric, by using the command set metric OSPF Applying Route Maps
Related manuals
Manual 8 pages 39.31 Kb Manual 21 pages 8.63 Kb

X8100, x908 specifications

The Allied Telesis x908 and the SwitchBlade x900 series of network switches are cutting-edge solutions designed to address the demands of modern networking environments. These switches are known for their high performance, reliability, and robust feature sets, making them ideal for enterprise and service provider networks.

The Allied Telesis x908 series consists of modular and chassis-based systems that can accommodate a variety of network configurations. One of the main features of the x908 series is its ability to offer high scalability with support for a large number of ports. This makes it suitable for data centers and large enterprise networks where space and bandwidth optimization are critical.

In addition to scalability, the x908 series supports advanced Layer 2 and Layer 3 switching capabilities. This allows for efficient traffic management and routing, ensuring that data is delivered swiftly and reliably. The x908 also incorporates intelligent features such as Quality of Service (QoS), which prioritizes critical network traffic, ensuring that time-sensitive data—like voice and video—maintains its quality during transmission.

The SwitchBlade x900 series takes this functionality further with its innovative modular architecture. This allows organizations to configure their networks to meet specific needs by choosing from a variety of interface cards and service modules. The SwitchBlade x900 also supports advanced security features such as Access Control Lists (ACLs) and VLAN segmentation, which provide enhanced protection against unauthorized access and network threats.

Another hallmark of the x908 and SwitchBlade series is their support for high-speed Ethernet technologies, including 10G and 40G Ethernet. This enables organizations to keep pace with the increasing bandwidth demands of applications and services, particularly in cloud computing and data-intensive workloads.

Both the x908 and the SwitchBlade x900 series are designed with energy efficiency in mind, featuring power-saving technologies that reduce overall operational costs. Coupled with Allied Telesis' management tools, which provide detailed analytics and monitoring, network administrators can optimize performance and energy consumption simultaneously.

In summary, the Allied Telesis x908 and SwitchBlade x900 series offer a comprehensive suite of features, high performance, scalability, and advanced networking technologies. They represent a strategic investment for organizations looking to build resilient, efficient, and future-proof network infrastructures.
Top Page Image Contents