Figure 24 DHCP Server Setup Screen
3Com recommends that you activate the DHCP server and leave it at the default values unless you already have a DHCP Server on your network.
■To activate the DHCP Server option, select Enable the DHCP server with the following settings:. The DHCP server will default to the addresses 192.168.1.100 to 192.168.1.200 if the IP address of the Gateway has been left at the default 192.168.1.1.
The Setup Wizard suggests a DHCP server address range that is valid for the LAN settings entered. If the defaults are used it will be .100
■To disable DHCP, select Do not enable the DHCP server.
Click Next when you have finished.
Viewing the Summary
When you complete the Setup Wizard, a configuration summary will display. See Figure 25 below. Verify the configuration information of the Gateway and click Finish to save your settings and restart the Gateway.
Figure 25 Configuration Summary Screen
3Com recommends that you print the Configuration Summary screen for your records.
If you have changed the IP address of your Gateway your computer will need to change its IP address to communicate with the Gateway. Reboot your computer once the Gateway has restarted to get a new address.
31