2Wire 3800HGV-B manual USB to PC Connection, Install the 2Wire Gateway USB Driver Windows

Connect the Computer to the Gateway

USB to PC Connection

1.Connect the provided AC power adapter from the 3700HGV-B’s POWER port to an electrical outlet. After the 3700HGV-B has completed its start up process, the POWER light on the front of the 3700HGV-B should be green.

2.Connect the provided blue USB cable from the 3700HGV-B’s USB-PCport to the USB port on the computer.

3.If the VDSL signal is carried over the phone line, connect the provided gray phone cable from the 3700HGV-B'sPHONE LINE port to telephone wall jack. If the VDSL signal is carried over coax, refer to page 11.

Install the 2Wire Gateway USB Driver - Windows

1.Insert the 2Wire setup CD in your computer’s CD-ROM drive.

2.Power on the computer. If the Add Hardware Wizard displays, follow the on-screen instructions. If prompted to identify where to search for drivers, deselect Floppy Disk drive and check CD-ROM drive.

3.After the driver installs click Finish to complete the driver installation. The Setup Wizard will resume when the PC has rebooted.

Note: Microsoft Windows 98 users may be prompted to insert the Windows 98 installation CD- ROM after installing the 2Wire gateway USB drivers. After the Windows 98 updates are complete, remove the Windows 98 CD and reinsert the Setup Wizard CD into the CD-ROM prior to rebooting the PC.

9