2Wire 3800HGV-B manual Specifies whether a USB device is present Active on

	Access the Management and Diagnostic Console
Item	Description
Network Name	The default setting is the word “2WIRE,” followed by the
	last three digits of the 2Wire gateway serial number.
Authentication	The authentication method used: Open, Shared, or WPA-
	PSK (Wi-Fi Protected Access pre-shared key).
Encryption	The encryption method used: WEP or TKIP.
Channel	The frequency channel in use. The default channel is 6. If
	multiple access devices within the vicinity use the same
	channel, you can set a different channel to eliminate poten-
	tial interference.

Devices (the information displayed is dependent on the gateway model features)

Ethernet	The number of Active and Inactive Ethernet devices on the
	network.
Wireless (802.11)	The number of Active and Inactive wireless devices on the
	network.
HomePNA	The number of Active and Inactive HomePNA devices on
	the network.
USB	Specifies whether a USB device is present (Active) on the
	network. If a USB device is not present, the value is
	Inactive.
MoCA	The number of Active and Inactive MoCA devices on the
	network.
Public Network
Router Address	Defines a separate network on the home side.
Subnet Mask	The subnet mask allocated for public address.

39