Figure 23: Connecting the USB Cable to the Camera

4

Open the door to the camera’s connector compartment and connect the square end of the USB

 

 

cable to the bottom (USB) connector (see Figure 23).

 

5

Set the camera to PC Connect mode

.

6 Power on the camera. Within a few seconds, your computer detects the camera on the USB port. What happens next depends on what version of Windows your computer is running:

Windows MeWindows 98 or 2000

Your computer runs the Microsoft Scanner and Camera Wizard. Follow the prompts in the Wizard to copy the images to your computer.

The main window of the HP Photo Imaging Software opens. Do the following:

1.Click Unload Camera in the main window.

2.Click the Start button in the Unload Images window. The images are copied to your computer.

Chapter 5: Sharing Images

40

Transferring Images to Your Computer