HP 618 manual Viewing Images on the Television, Connecting the Video Cable to the Camera

Note: To conserve battery power, you may want to use an HP-approved AC power adapter to power the camera while you have it connected to a television.

Figure 27: Connecting the Video Cable to the Camera

Note: When the camera is connected to a television, the image LCD turns off.

2Connect the audio input (red) end of the audio/video cable into the television’s audio input connector. This will allow you to hear sound that you recorded and attached to your images.

3Plug the other end of the video cable into the camera (see Figure 27).

4On the television, set the video input to be the video input connector where you connected the camera.

Viewing Images on the Television

When the camera is connected to a television, you can play or review your images on the television screen just as you would on the camera’s image LCD. You can also mark, protect, categorize, group, or delete images, or create a slideshow.

To view images on a television:

1Turn on the television and select the video input. See your television’s documentation for specific instructions on how to select the video input.

2Set the camera mode dial to either Playback mode or Review mode .

3View your images on the television using either Playback or Review mode.

The television functions the same as the camera’s image LCD. You can use the buttons on the 4-way controller to scroll through your images, or press the MENU button on the back of the camera to use the camera menus on your television’s screen.

Chapter 5: Sharing Images 51 Connecting the Camera to Your Television