HP 618 manual Setting the Display, Brightness Level, Instant Review

Setting the Display

Figure 72: Display Submenu Use the Display submenu to control the display on the camera’s image LCD.

Brightness Level

Use the Brightness Level setting to control the brightness of the display on the camera’s image LCD.

You can set the Brightness Level from 1 (dimmest) to 7 (brightest). The default value is 4.

To change the Brightness Level:

1Press the down or up arrow on the 4-way controller, if needed, to highlight the Brightness Level option.

2Press the right or left arrow on the 4-way controller to scroll through the values until you see the value you want.

3Press the right (Exit) soft key to save the setting, exit the Display submenu, and return to the Preferences menu.

Instant Review

The camera’s Instant Review feature allows you to see displayed on the image LCD either the One Shot image, the final image of a Continuous image sequence, or the first image of a Timelapse sequence you just captured. (See “Using Instant Review” on page 25 for more information.) The default setting is that Instant Review is on for 3 seconds, and the maximum setting is that it is

on for 30 seconds, after you capture either a One Shot image or the final image in a Continuous or Timelapse sequence.

To change the duration of the Instant Review period, or to turn Instant Review Off:

1Press the down or up arrow on the 4-way controller to highlight the Instant Review option.

2Press the right or left arrow on the 4-way controller to scroll through the values until you see the value you want.

3Press the right (Exit) soft key to save the setting, exit the Display submenu, and return to the Preferences menu.

Appendix A: Using the Preferences Menu 95 Setting the Display