HP 618 manual Shooting a One Shot Image, If you are using

Shooting a One Shot Image

If you are using the:

ŠShutter release button with no timer mode set, press the shutter release button. Wait for the shutter sound, indicating the camera has captured the image. Then release the button.

Š10-Second Timer mode, press and release the shutter release button. The timer LED on the front of the camera (see page 24) lights solid for 7 seconds. It then blinks for the final 3 seconds before the camera captures the image.

Š3-Second Remote timer mode, point the HP Remote Control at the camera, and press and release the Remote Control’s trigger button. The timer LED on the front of the camera (see page 24) blinks faster for 3 seconds. Then the camera captures the image.

If Instant Review is on (see “Using Instant Review” on page 25), you can do any of the following while the image you just captured is displayed in Instant Review on the image LCD:

ŠRecord sound that will be attached to this image. For information on how to do this, see “Recording Sound” on page 26.

ŠDelete the image by pressing the middle (Delete) soft key.

ŠSave the image to the memory card and return to the Capture mode immediately by pressing the right (Exit) soft key.

ŠDo nothing and, when Instant Review times out (the default time-out is 3 seconds), the image is then saved to the memory card automatically.

Chapter 3: Taking Pictures 19 Taking More Advanced Pictures