HP 618 manual Controlling Camera Sounds, Volume Level, System Sounds

Controlling Camera Sounds

Figure 73: Sound Submenu Use the Sound submenu to control the sounds used on your camera

Volume Level

The Volume Level setting allows you to determine the volume level of the sounds on your camera. This includes both the system sounds (see the next subsection) and the sounds you attach to images via the Sound Record button (see “Recording Sound” on page 26). You can set the Volume Level from 1 (lowest/softest) to 7 (highest/loudest). The default value is 4.

To change the Volume Level:

1Press the down or up arrow on the 4-way controller, if needed, to highlight the Volume Level option.

2Press the right or left arrow on the 4-way controller to scroll through the values until you see the value you want.

3Press the right (Exit) soft key to save the setting, exit the Sound submenu, and return to the Preferences menu.

System Sounds

The Systems Sounds setting determines whether or not you will hear the camera’s system sounds, such as shutter clicks, beeps, and so forth. The default value is On (that you will hear system sounds).

To change the setting so that System Sounds are turned Off:

1Press the down or up arrow on the 4-way controller to highlight the System Sounds option.

2Press the right or left arrow on the 4-way controller to change the value to Off.

3Press the right (Exit) soft key to save the setting, exit the Sound submenu, and return to the Preferences menu.

Appendix A: Using the Preferences Menu 97 Controlling Camera Sounds