Note: A group becomes a folder on the memory card, in which all the images in that group are stored.
Note: Group names must be eight characters or less, and cannot contain spaces. Also, the camera does not accept group names that begin with BR or TL (regardless of language) because these letters are reserved.
Figure 17: Two Images in a Group
Note: Dissolving a group does not delete the images in the group, only the group name.
Grouping Images and Dissolving Image Groups
You can group images to organize them in one folder on the memory card. To group images:
1Mark the images you wish to group.
2Press the MENU button on the back of the camera. The Edit menu of Review mode is displayed.
3Press the down arrow on the
4Move to the Group Name menu by pressing either the left (Create) soft key if there are no existing groups, or the left (Add) soft key and then the middle (Create New) soft key if there are existing groups.
5Name the new group by doing the following. (See the Note on the left for restrictions on group names.)
Press the up or down arrow on the
Press the right arrow on the
6Press the right (Exit) soft key to exit the Group Name menu, and then press Exit again to exit the Review mode menus. You are returned to the Review mode screen. The name of the group now appears in the image information for all the images in the group when each image is selected, and the images in the group have a link icon between them (see the example in Figure 17).
To dissolve (remove) the grouping on images:
1Select any image included in the group you want to dissolve.
2Press the MENU button on the back of the camera. The Edit menu of Review mode is displayed.
3Press the down arrow on the
4Press the center (Dissolve) soft key to dissolve (remove) the grouping.
5Press the right (Exit) soft key. You are returned to the Review mode screen, and the images are no longer grouped.
Chapter 4: Viewing and Reviewing Images | 33 | Using Review Mode |
|
|
|