3Com 6412M-25-TP manual Module Functions, Interfaces Supported, Uni, Atm I/O

Page 19

Module Functions

The 6412M-25-TP module has the following characteristics:

Twelve

ports operating

at

up

to

25

Mbps to connect stations or servers to the hub

or

CELLplex

4000. Each port

may

connect

to:

An

ATM

or

multimedia

workstation

that

requires a high bit rate (UNI connection)

A

UNI

device using

a

supported

interface

Physical interface: copper cable with RJ45 connector.

ONcore

12-Port

25

Mbps

ATM I/O

Module

connections:

port-to-port,

hub-to-server,

and hub-to-workstation.

 

 

 

 

 

 

 

Up

to

three

6412M-25-TP modules can be used in

the CELLplex 4000 expansion

unit,

thereby

providing

up

to

48

ATM

ports.

 

 

Up

to fourteen 6412M-25-TP modules

can

be used

in the 17-slot

ONcore hub at the

same

time (8

in

the 10-slot

ONcore

hub).

 

 

Interfaces Supported

The 6412M-25-TP module supports the following interfaces:

User-to-network (UNI)

Network-to-network (NNI)

Switch-to-switch (SSI)

The UNI interface is

defined in

the

following documents:

ATM Forum UNI Specification V3.0

and

V3.1

ITU (ex-CCITT) SG13

as defined

in

the following standards:

– I.413 (B_ISDN

User-Network Interface)

I.432 (Physical Layer)

Q.2931 (Signaling)

Chapter 1. Overview 1-3

Image 19
Contents Document Number August Model Number 6412M-25-TP EMC Directive Ii 25 Mbps ATM Module Installation and Users GuideCanadian Emissions Requirements ComplianceIii Vcci Class 1 ComplianceDisclaimer Copyright StatementTrademarks Iv 25 Mbps ATM Module Installation and Users GuideIBM Contents ISD Vi 25 Mbps ATM Module Installation and Users GuideIndex Figuresvii UTPViii 25 Mbps ATM Module Installation and Users Guide Tables TablesMbps ATM Module Installation and Users Guide Who Should Use This Guide How to Use This GuideContents of This Guide Prerequisite Knowledge This GuideTermATM Control Point used in this Backpressure GuideText Convention Bold3Com Documents Related DocumentsONcore Distributed Management Module Users- ProvidesGui Reference Documents Overview Features25 Mbps ATM Module Installation and Users Guide InstallationSET ATM I/O Module FunctionsInterfaces Supported UNIFor Campus NetworkingModule InstallationUnpacking 4000 Installation SummaryInstallation activities LEDInstalling the Module in an ONcore Hub InstallationInstalling the Module in an ONcore Hub OFF Module EjectorsBlank Panel Installing the Module in a CELLplex 4000 Expansion UnitCELLplex 4000 Module Ejectors TheCELLplex Installation Users GuideInstalling the Module in a CELLplex 4000 Expansion Unit 10 25 Mbps ATM Module Installation and Users Guide Connecting ATM DevicesCabling Up Trunk Patch UTP/FTP/STP Cabling InformationType Attenuation Class 100 Allowable Distance meters 12 25 Mbps ATM Module Installation and Users GuideCabling Distances TypeVia Building Wiring Connecting Devices to the ATM PortsDirect Cabling 14 25 Mbps ATM Module Installation and Users GuideRD+ ConnectorsSignal CablesTwisted-Pair Cable 16 25 Mbps ATM Module Installation and Users GuideNon-ATM Forum Compliant UNI Devices RD+ TD+ Port Non-Compliant 25.6-Mbps Device18 25 Mbps ATM Module Installation and Users Guide Parameters ConfigurationFlowcontrol SlotPort ModeExample Configuration Settings25 Mbps ATM Module Installation and Users Guide Port Information Saving Configuration SettingsPort Network Operation Front Panel Module Installation Users GuideColor State Meaning LED Name Color State Front Panel CELLplex TroubleshootingVerifying LED Operation ONcoreDoes PortLight IdleCause Port Status PossibleAction Port StatusNot Light Yellow During Traffic Status LEDDuring Traffic Reset ResetChapter Troubleshooting Only SlotWhen Determining the Failing Component Using a Wrap Test Replacing 6412M-25-TP Modules Electrical Specifications General SpecificationsEnvironmental Specifications Weight Lbs 1.5 kg SpecificationsAppendix B. ATM Components B-1 Appendix B. ATM Components25 Mbps ATM Module Installation and Users Guide Board Service Online Technical ServicesAppendix Technical Support C-1 Isdn AccessDigital Modem ModemAppendix C. Technical Support C-3 3ComFacts Automated Fax ServiceSite 3ComForum on CompuServeCountry Telephone Support From 3Com Corporation Support From Your Network SupplierAppendix C. Technical Support C-5 These numbers are toll-free Appendix C. Technical Support C-7 Returning Products for RepairMIB Contacting 3Com ISD Technical PublicationsIndexX-1 IndexIndexX-2 IndexX-3 IndexX-4 Limited Warranty Limited Warranty3Com Corporation

6412M-25-TP specifications

The 3Com 6412M-25-TP is a powerful and robust networking solution tailored for small to medium-sized businesses and enterprises looking to enhance their network infrastructure. This Layer 2 managed switch is designed to facilitate efficient data communication while providing a variety of features that ensure optimal performance and security.

One of the main features of the 3Com 6412M-25-TP is its support for up to 24 10/100 Mbps Ethernet ports, enabling high-speed connections for multiple devices. Additionally, it provides two Gigabit Ethernet uplink ports, allowing for seamless integration with high-bandwidth applications and better connectivity options. The switch is particularly praised for its ability to handle heavy traffic loads while maintaining low latency, making it suitable for environments requiring reliable and fast data transmission.

In terms of technologies, the 3Com 6412M-25-TP employs advanced switching capabilities, which help in forwarding data efficiently within the network. It features support for VLANs (Virtual Local Area Networks), allowing network administrators to segment traffic and improve security. This ability also enhances broadcast control and aids in managing network congestion. Quality of Service (QoS) features further refine traffic management by prioritizing critical applications, ensuring that latency-sensitive services, such as VoIP and video conferencing, receive the bandwidth they need.

Another notable characteristic of the 3Com 6412M-25-TP is its user-friendly web management interface, which facilitates straightforward configuration and monitoring of the switch. This interface enables administrators to manage settings efficiently, track performance, and diagnose issues in real-time. Additionally, the switch supports SNMP (Simple Network Management Protocol), providing further options for network management and monitoring via external software solutions.

With a compact design, the 3Com 6412M-25-TP can be easily integrated into existing network setups without requiring excessive space. Its reliability and performance make it a trustworthy choice for businesses aiming to bolster their network capabilities. The combination of speed, management features, and security makes the 3Com 6412M-25-TP a valuable and versatile addition to any organization's networking arsenal.