2Wire 1000SW manual

4.In the Profile Management field, enter your profile name. The profile name identifies your wireless profile, and should be no more than 29 characters in length.

5.Click Apply. The 340 Series Properties screen appears.

6.Select the System Parameters tab. In the Client Name field, enter a client name. The client name identifies your PC.

7.In the SSID1 field, enter the word “2WIRE” followed by the last three digits of your HomePortal serial number. This is the Wireless Network Name. The Wireless Network Name is case-sensitive, so it is important that you enter the word “2WIRE” in capital letters.

8.In the Power Save Mode field, verify that the

radio button is

9.In the Network Type field, verify that the Infrastructure radio button is selected (this is the default).

10.Select the Network Security tab. In the WEP field, select the Use Static WEP Keys radio button.

11.In the WEP Key Entry Method field, verify that the Hexadecimal (0-9,A-F)radio button is selected.

12.In the WEP Key 1 field, select the Transmit Key radio button and enter your ten-digit Wireless Encryption Key, located on the bottom of your HomePortal.

40