Step 2
Connect Your First Computer to the HomePortal
Choose a computer and connection type
The first computer you connect to your home network is used to configure the HomePortal residential gateway for proper operation. Choose one of the following methods to connect your first computer to the HomePortal. Save and close all open programs before you begin connecting your HomePortal.
Connection Type | Go to... |
|
|
Ethernet | page 6 |
Requires: A computer with an Ethernet port. |
|
Recommended for: Primary computer in the same room as the HomePortal. |
|
|
|
USB | page 7 |
Requires: A Windows 98, 98 SE, ME, Windows 2000, or Windows XP computer |
|
with an available USB port. |
|
Recommended for: Primary computer in the same room as the HomePortal. |
|
|
|
Home phoneline networking (HomePNA) | page 10 |
Requires: A computer with a HomePNA port or an external HomePNA adapter |
|
such as the 2Wire PC Port. |
|
Recommended for: Additional computers in the same room as the HomePortal |
|
or computers in other rooms. |
|
|
|
Network connection via Ethernet hub or switch | page 11 |
Requires: An Ethernet hub or switch and a computer with an Ethernet port. |
|
Recommended for: Multiple computers in the same room as the HomePortal. |
|
|
|
Wireless (Model 1000SW only) | page 12 |
Requires: A computer with an 802.11b wireless network adapter* installed. |
|
Wireless adapters are purchased separately from the HomePortal. |
|
Recommended for: Mobile computers such as laptops. |
|
|
|
*If you use a 2Wire wireless adapter (PC card or USB adapter) for wireless networking, the HomePortal Setup Wizard software automatically configures it to communicate with the HomePortal during setup, but you will need to install the driver. See Appendix A for detailed installation instructions.
If you are NOT using a 2Wire wireless adapter, you will need to manually configure your adapter of choice to communicate with the HomePortal BEFORE installing the HomePortal software. See Appendix B for detailed configuration instructions.
5