Changhong Electric LT1512E, LT1712E, LT2012E, LT2612E, LT3212E Channel Switch, Sleep Function

Sleep 30

●Channel Switch

Use the number buttons to choose the desired channel directly or press【CH+】/【CH-】on the panel or【P+】/【P-】on the remote control to select the channel number. If a channel number is in SKIP ON mode, the next channel will be displayed.

A maximum of 2 digits can be keyed in at one time, the number button on the remote control is used. The symbol of “- -”on the upper-right corner represent tens and one respectively. The range is 0～99. The first input number is for tens, if it is “1”,“1-”appears on screen. The TV will switch to channel 1 if no additional number is keyed in within 3 seconds. Alternatively, press【OK】to switch to the desired channel after the corresponding number is keyed in.

Note: This function is only available in TV mode

●Sleep Function

Press【SLEEP】on the remote control once to activate the function and subsequent keying in to select the sleep time of 0, 15, 30, 45, 60,90, 120, 150,180, 240 and 0 minutes. This is will be reflected in the top right hand corner of the screen. After this step is done, press【SLEEP】to view the set sleep. See the illustration in the right.

● Indicator Light

Status	Light Color	Description
On/Off	Off	The TV works normally/is power
		off
Standby	Red	In Standby Mode
Timer On/Off Or Sleep	Green	Timer On/Off is valid or Sleep is
		on
Sleep (PC)	Yellow	Sleep for power-saving;
Receives signal from	Flickering	The indicator will flicker when the
		TV receives signal from the
the remote control
		remote control

PAGE19