Changhong Electric LT1512E, LT1712E, LT2012E, LT2612E, LT3212E manual Ⅴ Clock, Ⅵ PC Setup, PAGE17

●Color System

To set the color system of the current program and use 【V+】/【V-】to switch between PAL, NTSC,N4.43, SECAM and AUTO systems.

●Sound System

To switch between D/K,L, B/G and I sound systems.

●Skip

Skipping the unwanted program can dramatically quicken program selection.

1.Turn Skip on, pressing【P+】/【P-】can not select this program.

2.Input the program number directly to locate the program.

Note: There is only Color System for the Tune Menu in AV, RGB and signal sources. There is PC Setup menu for the Tune menu in PC signal source. There is no Tune menu in YPbPr signal source.

ⅤClock

●Current Time

The current time can be set by using the number buttons (0-9) or【V+】/【V-】.

●On Time

The function of On Time can be effective when On Mode is on. Press the number buttons or【V+】 /【V-】to set the time.

●On Mode

When this function is on, a preset time can be programmed to turn on the TV.

●On Prog

To enter a selected program directly after Timer On is set.

●Off Time

The function of Off Time can be effective only when Off Mode is on. Press the number buttons (0-9) or【V+】/【V-】to adjust the time.

●Off Mode

When this function is on, a preset time can be programmed to turn off the TV.

Note: The TV can only be turned on automatically when it is in standby mode. The Clock menu is applicable in all signal sources.

ⅥPC Setup

● H Position

To adjust picture position horizontally. ● V Position

To adjust picture position vertically. ● Clock

To adjust picture clock position. ● Phase

To adjust picture phase. ● Colour Temp

Four modes of Warm、Normal、Cool and User can be chosen with 【V+】/【V-】in cycle. Only in User mode can adjustments be made to the three options: Red, Green and Blue. ● Auto Adjust

PAGE17