•If the number of files inside the recording folder reached 200 or the memory becomes full, you will not be able to record any further, and [FULL] will be displayed. Select another folder or delete any unnecessary file before recording.
•When the remaining recording time is less than 60 seconds, the recording indicator light starts flashing. When the recording time is decreasing to 30 or 10 seconds, the light flashes faster.
Recording from external microphones or other devices:
External microphones and other devices can be connected and the sound can be recorded. Microphones supported by
"
•Do not plug and unplug devices into the recorder’s jack while it is recording.
•The
Playback
1Select the file to be played from the folder.
•Press the FOLDER/INDEX button to select the folder, and the 9or 0button to select the file.
2Press the `OK button to start playback.
Current folder
File number
Elapsed playback time
3Press the + or − button to adjust to a comfortable listening volume.
•The volume can be adjusted within a range from [00] to [30].
4Press the STOP (4) button at any point to stop playback.
Playback through earphone:
An earphone can be connected to the EAR jack of the recorder for listening.
"
•To avoid ear irritation, insert the earphone after turning down the volume level. When you listen with the earphone during playback, do not raise the volume too much.
It may cause hearing impairment and a decrease in hearing ability.
Forwarding and rewinding:
While the recorder is during playback mode, press and hold the 9or
0button.
•When you release the button the recorder will resume normal playback.
•If there is an index mark in the middle of the file, the recorder will stop once at that position.
Locating the beginning of a file:
While the recorder is during stop mode or playback mode, press the
9button.
•The recorder skips to the beginning of the next file.
While the recorder is during playback mode, press the 0button.
•The recorder skips to the beginning of the current file.
While the recorder is during stop mode, press the 0button.
•The recorder skips to the beginning of the previous file. If the recorder is in the middle of a file, it will return to the beginning of the file.
While the recorder is during playback mode, press the 0button twice.
•The recorder skips to the beginning of the previous file.
"
•During playback, skipping to the beginning of a file that contains an index mark will make the playback start from the closest index mark position.
•When you try to skip to the beginning of the file during playback, setting the [SKIP] to [ON] will make the recorder forward skip 10 seconds or reverse skip 3 seconds.
Changing the playback speed
1Press the `OK button to start playback.
2Press the `OK button again to open the playback speed adjustment display.
3Press the + or − button to adjust the playback speed.
[1.0 PLAy]: Playback at normal speed.
[0.5 PLAy] – [0.9 PLAy]: Playback speed slows down.
[1.1 PLAy] – [2.0 PLAy]: Playback speed becomes faster.
4Press the `OK button to complete the setting.
•If you leave the recorder for
3 seconds, the setting will be applied and the recorder will return back to the original screen.
"
•Even if playback is stopped, the changed playback speed will be retained. The next playback will be at that speed.
•If you set the noise cancel function to [ON], you will not be able to change the playback speed.
How to begin segment repeat playback: (For
1Press the `OK button to start playback.
2Press the REC (s) button at the point you want to start segment repeat playback.
•[A] will flash on the display.
•Reaching the end of a file while [A] is still flashing will make that point the end position, and make repeat playback start.
3Press the REC (s) button again at the position where you want to end segment repeat playback.
•
•The recorder repeatedly plays back the segment until the segment repeat playback is canceled.
•As in normal playback mode, playback speed can be changed during segment repeat playback as well.
EN