ENABLING REMOTE ACCESS
PC with a network card ReadiManager LX100 Server
Crossover cable, OR 2 Ethernet cables and a small Ethernet hub or switch.
To connect the unit
1.Connect the ReadiManager’s Ethernet port to an Ethernet port on the PC via a crossover cable, or connect both the ReadiManager and the PC to the same Ethernet switch (or hub) using standard Ethernet cables.
2.Power on both devices.
3.Configure the Network settings of the PC to the following by changing the TCP/IP properties so that it can communicate with the Polycom ReadiManager LX100. If you need more instructions on how to perform this, see the directions on Configuring Network Connections for the unit on page 11.
IP Address: Can be any IP address from 192.168.1.1 through 192.168.1.253 (e.g. 192.168.1.37)
Subnet Mask: 255.255.255.0
4.Using the PC, launch an Internet Explorer Browser and type “http://192.168.1.254” in the browser’s “Address” field to access the ReadiManager LX100 server.
5.When a login prompt appears, enter the following:
Username: administrator
Password: polycom
•If Windows authentication window doesn’t launch then verify that both the ReadiManager server and the PC each have the correct network configuration, and that the devices can “ping” each other. If you do not know how to accomplish this, contact your IT administrator.
6.When you arrive at the Welcome to Polycom ReadiManager LX100 page, configure the system to work with your network.
© Polycom, Inc. | 7 |