Recording
•Turn the power on (➜ page 6).
•Press STOP to stop the unit.
1Slide recording position switch to select a position.
Switch modes according to situations (➜ page 8).
2 Select a folder for recording.
FOLDER
The folder is switched each time you press .
Select among “
” (The factory setting is “
”).
When you select “
”, recording is automatically saved in “
” (If the folder already contains 99 files, the next folder with recordable space is used).
3Press REC/PAUSE (Recording starts).
Each time you press Pause 
Recording resumes
Display during recording
Light stays on.
(Blinks while paused.)
The display changes depending
on recording levels.
Recording elapsed time 
(Blinks while paused.)
To stop: Press STOP .
Folder
[Folder] for this unit means locations in which recording (music) files are stored. There are 4
audio folders “
”
and 1 music folder “
” in this unit.
Using each folder according to the purposes of recording enables you to search files easily later. A maximum of 99 files can be saved into each audio folder 
to 
.
File
Recorded audio data from the starting point to the ending point is saved as a file.
The saved data is called a file.
*Even if you change the position of Recording position switch during recording, the setting will not be changed until the recording is complete.
*Change the recording mode as necessary (➜ page 15).
*Do not block the holes of the zoom microphone and
Basic Operations
RQT9422
9