User Manual | English |
Installation
1.Charge the recorder for 3 hours, using the supplied USB cable, before first use. After the first charge you only need to charge the recorder for 2.5 hours.
2.Plug the USB receiver dongle into the USB port of your PC and turn on the Voice Recorder.
3.Windows will recognise the dongle and install the necessary drivers. Once Windows has finished installing the device move to the next step.
4.Insert the CD and follow the instructions to install the
Recorder software. If the disk does not autorun then please go to My Computer, select your CD drive and double click on setup.exe
5.Once the installation has completed, double click the Wireless Recorder icon on your desktop to run the software.
6.Next you will need to pair the USB receiver dongle and the recorder:
6.1.Within the software, click the Setup button 
6.2.Next, click the Link button. The link indicator on the USB dongle will light up to show that it is ready to be paired.
6.3.Hold the recorder approximately 10cm away from the USB receiver dongle until the Link Indicator blinks. The recorder will beep twice to confirm that a connection has been made.
Key Map
- 3 -