•To continue the search, press t or s.
•To hold the frequency, press HOLD/BAND. h appears on the dis- play. To continue the search, press and hold t or s for about 1 second.
Notes:
•If you want to step through the frequencies while h is displayed, press t or s.
• If you tune to a search skip frequency, L appears on the dis- play (see “Search Skip Memory” on Page 24).
•If you press HOLD/BAND, the scanner restarts as a band search. b, SRCH, and t or s appear on the display.
Search Skip Memory
You can skip up to 20 specified frequencies during a band or direct search. This lets you avoid unwanted frequencies or ones you have al- ready stored in a channel.
To skip a frequency, press
To clear a single frequency from skip memory so the scanner can stop on it during a band or direct search, press HOLD/BAND to hold the search, press t or s to select the frequency, then press
To clear all the skip frequencies at once, while in the search mode, press HOLD/BAND, then press and hold
Notes:
•If you program more than 20 frequencies to skip, each new fre- quency replaces one you stored earlier, starting from the first stored frequency.
•You can select the skipped frequency when the scanner is in the hold mode. The scanner displays L when you select a skipped fre- quency.
24