LISTENING TO THE MONITOR MEMORY
The scanner has one monitor memory. You can use this memory to temporarily store a frequency while you decide whether to store it into a channel. This is handy for quickly storing an active frequency when you search through an entire band. Once you have temporarily stored a fre- quency into the scanner’s monitor memory, you can listen to it by press- ing MANUAL then MON/0.
MOVING A FREQUENCY FROM THE MONITOR MEMORY TO A CHANNEL
Follow these steps to move a frequency stored in the monitor memory to a permanent channel.
1.Press MANUAL. MAN appears on the display.
2.Enter the number for the channel where you want to store the monitor frequency. The channel number appears on the display.
3.Press MANUAL. The frequency currently assigned to that channel appears.
25