BASIC OPERATION
TURNING ON THE SCANNER AND SETTING SQUELCH
Note: Make sure the scanner’s antenna is connected before you turn it on.
1. Turn SQUELCH MIN/MAX fully counterclockwise.
VO L U ME SQ UEL CH
O F F M A X MI N M A X
2.Turn VOLUME OFF/MAX clockwise until it clicks and you hear a hissing sound.
VO L U ME SQ UEL CH
O F F M A X MI N M A X
3.Turn SQUELCH MIN/MAX clockwise, then leave it set to a point just after the hissing sound stops.
The scanner automatically starts scanning channels. Press MAN- UAL to stop scanning.
Note: If you have not stored frequencies into any channels (see “Searching For and Storing Active Frequencies” on Page 21), the scanner does not scan.
20