•If you tried to store a frequency in a locked channel, the scanner beeps once and L (next to the channel number) and LOC flash on the display, then the frequency flashes. To store the frequency, either unlock the channel (see “Using Channel Lock” on Page 30) and repeat Steps
Repeat Steps
Note: When you store a frequency in a channel, the scanner auto- matically locks that channel (see “Using Channel Lock” on Page 30).
SCANNING THE STORED CHANNELS
Scanning All Channels
To begin scanning all the stored channels in your scanner, press M.SCAN. The scanner scans through all channels in the activated banks which are not skipped (see “Skipping Channels” on Page 28).
Note: Press or to change the scan direction.
Turning Channel-Storage Banks On and Off
You can turn each
While scanning, press the number key of the bank you want to turn on or off. If the memory bank indicator bar is on, the bank is turned on and the scanner scans all channels within that bank that are not skipped. If the indicator is off, the scanner does not scan any of the channels within that bank.
25