4.Press ENTER to set the frequency. The cursor moves to $. If the entered frequency is incorrect, %EM8C@;ý"I<H briefly appears.
5.Enter your desired
ENTER.
6.Rotate SQUELCH clockwise and leave it set to a point just after the hissing sound stops.
7.Press SEARCH to start searching. When the scan- ner finds an active frequency, it stops searching.
Special Notes:
•You can copy and save a frequency into a specified bank, channel, or priority channel when the scanner finds an active frequency. See “Using Frequency Copy Function” on Page 39 to save the frequency. The frequency copy functions only in search banks 2, 3, 4 and 5.
•While the scanner is searching, you can use the seek search by pressing FUNC then 7. The display indicates /<<Bý +* at the bottom line. The scanner stops at an active frequency for five seconds and restarts searching automatically. The scanner repeats this operation.
•You can set Zeromatic on or off by pressing FUNC then 0. Press FUNC then 0 again to reverse the Zer- omatic setting. Whenever this feature is turned on, 6<IFD8K@:ý+* briefly appears then Q appears at the first digit of the second line and the scanner stops at the correct frequency. When you turn this feature off, Q disappears and the scanner stops when it detects an active signal. Zeromatic functions only in search bank 2, 3, 4 and 5.
•There are several group banks in SR2 Police/Fire and SR4 ham bands. You can turn off or on the groups by pressing the group numbers. For exam- ple to turn off ò, press 0.
•In the Air and the Limit search bands, press FUNC then 8 to start searching up from the lowest fre-
36Operation