teresting transmission on a specific channel. When priority is turned on, the scanner checks that channel ev- ery 2 seconds, and stays on the channel if there is activ- ity until the activity stops.
Notes:
•The priority feature does not operate while the scan- ner receives trunking (voice channel) frequencies.
•If you program a weather channel as the priority channel, the scanner stays in the priority channel only when the scanner detects the weather alert tone.
To program a frequency in the priority channel:
1.Press MANUAL.
2.Use the number keys to enter the channel number which contains the frequency you want to program as the priority channel. Then press MANUAL again.
3.Press FUNC then PRI. ,I@ý á?8EE<C blinks on the bottom line.
To program the priority channel directly:
1.Press PGM.
2.Press PRI.
3.Enter the frequency you want to enter into the prior- ity channel, then press ENTER.
Note: This scanner cannot set a channel as the priority channel if the channel's receive mode is MOT or ED.
To program a weather channel as the priority channel:
1.Press WX.
2.Select the weather channel you want to program as the priority channel.
3.Press FUNC then PRI. ,I@ý á?8EE<C flashes on the bottom line two times.
Special Features | 45 |