Radio Shack PRO-91 Scanning the Scan Lists, Scanning Type I and Hybrid Trunked Systems

Page 50

20-521.fm Page 50 Wednesday, August 4, 1999 3:32 PM

SCANNING THE SCAN LISTS

Press SCAN to begin scanning the lists you have stored.

Note: If you have not stored any IDs, SCAN scrolls on the display, but your scanner does not stop on an ac- tive conversation.

To remove a scan list from active scanning, use the number keys to enter the scan list’s number. The scan list number turns off, and the IDs in that list are not scanned.

Note: One scan list must always be active. You cannot remove all of the scan lists.

To restore a scan list to active scanning, use the num- ber keys to enter its number again.

Press SRC to return to the scanner’s previous function.

SCANNING TYPE I AND HYBRID TRUNKED SYSTEMS

Your PRO-91 is set to scan Type II user IDs by default. When you scan trunked frequencies, each Type II user ID you see appears as an even number without a dash (such as 2160). Your PRO-91 can also scan Type I trunked systems. Each Type I ID appears as a three- or four-digit number, followed by a hyphen, followed by a one- or two-digit number (such as 200-14). If you no- tice a mix of odd- and even-user IDs (such as 6477, 2160, 6481, 6144, and 1167), then you are probably monitoring either a Type I or hybrid (a combination of Type I and Type II user IDs) system (see “Types of Trunking Systems” on Page 39).

You might also notice that you are missing responses when you hold on an active ID. Unlike Type II systems, Type I and hybrid systems require a fleet map that sets specific fleet-subfleet parameters. It is easy to select a fleet map to scan; what is not always easy is selecting or programming a map that is being used in your partic- ular area.

50

Page 49 Page 51
Image 50
Page 49 Page 51
Contents PRO-91 150-Channel Handheld Trunking Scanner Features Fm Page 3 Wednesday, August 4, 1999 332 PM Frequency Step Transmission Range MHz KHz FCC Notice Scanning LegallyContents General Guide to Scanning Special FeaturesTrunk Tracking Fm Page 8 Wednesday, August 4, 1999 332 PM Preparation Power SourcesUsing Internal Batteries Fm Page 10 Wednesday, August 4, 1999 332 PM Charging Nickel-Cadmium Batteries Using AC Power Using Vehicle Battery Power Plug the adapter’s barrel plug into your scanner’s Connecting the Antenna Connecting an Optional AntennaListening Safely Connecting AN EARPHONE/ HeadphonesTraffic Safety Connecting AN Extension Speaker Attaching the Belt ClipAbout Your Scanner Look AT the Keypad Look AT the Display Fm Page 21 Wednesday, August 4, 1999 332 PM Channel Storage Banks Service BanksUnderstanding Banks Monitor Memories Turning on the Scanner and Setting Squelch OperationStoring Known Frequencies Into Channels Searching for and Temporarily Storing Active Frequencies Limit SearchDirect Search Service Bank Search Search Skip Memory Listening to the Monitor Memories Moving a Frequency from a Monitor Memory to a ChannelScanning the Stored Channels Manually Selecting a ChannelFm Page 32 Wednesday, August 4, 1999 332 PM Turning CHANNEL-STORAGE Banks on and OFF Special FeaturesDelay Locking OUT Channels PriorityFm Page 35 Wednesday, August 4, 1999 332 PM Changing Search Speeds Using the KeylockUsing the Display Backlight Normal Search HypersearchTurning the Battery Save Function OFF/ON Turning the KEY Tone OFF/ONSkipping Data Signals Trunk Tracking Types of Trunking SystemsSetting the Scanner to the Trunk Tracking Mode II systems. Nevertheless, Type I systems are still in useSetting Squelch for the Trunk Tracking Mode Storing Trunked FrequenciesFm Page 42 Wednesday, August 4, 1999 332 PM Scanning a Trunked Bank Monitoring an Active ID Temporarily Storing an ID into the Monitor ID MemoryUnlocking All IDs Locking Out IDsUnlocking a Single ID Using Trunk Tracking Scan Delay Monitoring IDsChannel Activity Bars Scan Lists Manually Storing IDs into Scan ListsMoving IDs to Scan Lists Deleting a Stored IDScanning the Scan Lists Scanning Type I and Hybrid Trunked SystemsProgramming a Fleet Map Size Fleets Subfleets IDs Blocks Used E1P1 E1P2 E1P3 Size E1P4 E1P5 E1P6 Size Selecting a Preset Fleet Map Programming a Hybrid System National Weather Frequencies General Guide to ScanningGuide to Frequencies Canadian Weather FrequenciesPrimary Usage Guide to the Action BandsTypical Band Usage VHF BandBand Allocation AbbreviationsVery High Frequency VHF Ultra High Frequency UHF Frequency Conversion Troubleshooting Problem Possible Remedy CauseError Adjust squelch for Resetting the Scanner Care and Maintenance Specifications Fm Page 69 Wednesday, August 4, 1999 332 PM Fm Page 70 Wednesday, August 4, 1999 332 PM Fm Page 71 Wednesday, August 4, 1999 332 PM Limited One-Year Warranty RadioShack Division of Tandy Corporation Fort Worth, Texas

PRO-91 specifications

The Radio Shack PRO-91 is a handheld scanner that appeals to both amateur radio enthusiasts and professionals seeking a reliable and versatile communication device. Known for its user-friendly design and wide range of features, the PRO-91 is an excellent choice for monitoring various frequencies, including VHF and UHF bands.

One of the standout features of the PRO-91 is its capability to scan frequencies in the 25-1300 MHz range, which allows users to listen in on a variety of communications. This includes police, fire, and emergency services, as well as amateur radio transmissions and aircraft communications. The scanner supports both analog and some digital formats, making it adaptable to different communication standards and ensuring users stay updated with relevant broadcasts.

The PRO-91 comes with 200 programmable channels, allowing users to store their favorite frequencies for quick access. It also features a million frequency search capability, enabling it to detect active signals within the scanning range. Additionally, the scanner includes a priority channel function, permitting users to designate a specific frequency to continuously monitor while scanning through other channels.

Another notable characteristic of the PRO-91 is its triple conversion design, which enhances sensitivity and selectivity, resulting in improved audio clarity and reduced interference. The unit is equipped with a robust speaker that delivers clear sound quality, making it easy to understand transmissions even in noisy environments.

Users will appreciate the ergonomic design of the PRO-91, which features intuitive controls and a backlit LCD display for easy visibility, even in low-light conditions. The keypad layout is designed for straightforward operation, allowing even novice users to navigate through menus and settings with ease.

The PRO-91 is powered by a rechargeable battery, offering extended usage without the need for constant battery replacements. Its compact and lightweight construction makes it portable, making it suitable for on-the-go monitoring.

In conclusion, the Radio Shack PRO-91 offers an impressive array of features, technologies, and characteristics that cater to diverse scanning needs. With its wide frequency range, programmable channels, and superior audio quality, it stands out as a reliable choice for anyone looking to explore the world of radio communication. Whether for recreational use or professional monitoring, the PRO-91 ensures users remain connected to the signals that matter most.
Top Page Image Contents