Radio Shack PRO-91 owner manual Error

Page 64

20-521.fm Page 64 Wednesday, August 4, 1999 3:32 PM

PROBLEM

POSSIBLE

CAUSE

REMEDY

PROBLEM

POSSIBLE

REMEDY

CAUSE

 

 

 

 

 

 

 

 

 

An antenna is not

Make sure an

 

connected or

antenna is con-

 

connected incor-

nected to the

 

rectly.

scanner.

 

 

 

Error

Programming

Re-enter the fre-

appears.

error.

quency correctly,

 

 

including the deci-

 

 

mal point.

 

 

 

The scanner

Stored frequen-

Avoid storing fre-

locks on frequen-

cies are the same

quencies listed

cies that have an

as “birdie” fre-

under “Birdie Fre-

unclear transmis-

quencies.

quencies” on

sion.

 

Page 57 or only

 

 

listen to them

 

 

manually.

 

 

 

Scanner will not

The transmis-

Scan another

track a trunked

sion might not

transmission.

system.

use a system that

 

 

can be tracked by

 

 

your scanner.

 

 

 

 

 

The data fre-

Find the data fre-

 

quency is miss-

quency (see

 

ing.

“Storing Trunked

 

 

Frequencies” on

 

 

Page 41).

 

 

 

 

The system you

Set the scanner to

 

are trying to track

receive Type I

 

is a Type I sys-

trunked frequen-

 

tem, and the

cies. See “Scan-

 

scanner is set to

ning Type I and

 

scan Type II sys-

Hybrid Trunked

 

tems.

Systems” on

 

 

Page 50.

 

 

 

Scanner is set to receive Type I trunked frequen- cies, but does not scan them.

The fleet map you have select- ed or entered might be incor- rect.

Check the fleet map and correct it if necessary (see “Scanning Type I and Hybrid Trunked Sys- tems” on Page 50 and “Program- ming a Fleet Map” on Page 51).

64

Image 64
Contents PRO-91 150-Channel Handheld Trunking Scanner Features Fm Page 3 Wednesday, August 4, 1999 332 PM Frequency Step Transmission Range MHz KHz FCC Notice Scanning LegallyContents Trunk Tracking Special FeaturesGeneral Guide to Scanning Fm Page 8 Wednesday, August 4, 1999 332 PM Using Internal Batteries Power SourcesPreparation Fm Page 10 Wednesday, August 4, 1999 332 PM Charging Nickel-Cadmium Batteries Using AC Power Using Vehicle Battery Power Plug the adapter’s barrel plug into your scanner’s Connecting the Antenna Connecting an Optional AntennaTraffic Safety Connecting AN EARPHONE/ HeadphonesListening Safely Connecting AN Extension Speaker Attaching the Belt ClipAbout Your Scanner Look AT the Keypad Look AT the Display Fm Page 21 Wednesday, August 4, 1999 332 PM Understanding Banks Service BanksChannel Storage Banks Monitor Memories Turning on the Scanner and Setting Squelch OperationStoring Known Frequencies Into Channels Searching for and Temporarily Storing Active Frequencies Limit SearchDirect Search Service Bank Search Search Skip Memory Listening to the Monitor Memories Moving a Frequency from a Monitor Memory to a ChannelScanning the Stored Channels Manually Selecting a ChannelFm Page 32 Wednesday, August 4, 1999 332 PM Delay Special FeaturesTurning CHANNEL-STORAGE Banks on and OFF Locking OUT Channels PriorityFm Page 35 Wednesday, August 4, 1999 332 PM Using the Keylock Using the Display BacklightChanging Search Speeds Normal Search HypersearchTurning the Battery Save Function OFF/ON Turning the KEY Tone OFF/ONSkipping Data Signals Trunk Tracking Types of Trunking SystemsSetting the Scanner to the Trunk Tracking Mode II systems. Nevertheless, Type I systems are still in useSetting Squelch for the Trunk Tracking Mode Storing Trunked FrequenciesFm Page 42 Wednesday, August 4, 1999 332 PM Scanning a Trunked Bank Monitoring an Active ID Temporarily Storing an ID into the Monitor ID MemoryUnlocking a Single ID Locking Out IDsUnlocking All IDs Using Trunk Tracking Scan Delay Monitoring IDsChannel Activity Bars Scan Lists Manually Storing IDs into Scan ListsMoving IDs to Scan Lists Deleting a Stored IDScanning the Scan Lists Scanning Type I and Hybrid Trunked SystemsProgramming a Fleet Map Size Fleets Subfleets IDs Blocks Used E1P1 E1P2 E1P3 Size E1P4 E1P5 E1P6 Size Selecting a Preset Fleet Map Programming a Hybrid System General Guide to Scanning Guide to FrequenciesNational Weather Frequencies Canadian Weather FrequenciesGuide to the Action Bands Typical Band UsagePrimary Usage VHF BandBand Allocation AbbreviationsVery High Frequency VHF Ultra High Frequency UHF Frequency Conversion Troubleshooting Problem Possible Remedy CauseError Adjust squelch for Resetting the Scanner Care and Maintenance Specifications Fm Page 69 Wednesday, August 4, 1999 332 PM Fm Page 70 Wednesday, August 4, 1999 332 PM Fm Page 71 Wednesday, August 4, 1999 332 PM Limited One-Year Warranty RadioShack Division of Tandy Corporation Fort Worth, Texas

PRO-91 specifications

The Radio Shack PRO-91 is a handheld scanner that appeals to both amateur radio enthusiasts and professionals seeking a reliable and versatile communication device. Known for its user-friendly design and wide range of features, the PRO-91 is an excellent choice for monitoring various frequencies, including VHF and UHF bands.

One of the standout features of the PRO-91 is its capability to scan frequencies in the 25-1300 MHz range, which allows users to listen in on a variety of communications. This includes police, fire, and emergency services, as well as amateur radio transmissions and aircraft communications. The scanner supports both analog and some digital formats, making it adaptable to different communication standards and ensuring users stay updated with relevant broadcasts.

The PRO-91 comes with 200 programmable channels, allowing users to store their favorite frequencies for quick access. It also features a million frequency search capability, enabling it to detect active signals within the scanning range. Additionally, the scanner includes a priority channel function, permitting users to designate a specific frequency to continuously monitor while scanning through other channels.

Another notable characteristic of the PRO-91 is its triple conversion design, which enhances sensitivity and selectivity, resulting in improved audio clarity and reduced interference. The unit is equipped with a robust speaker that delivers clear sound quality, making it easy to understand transmissions even in noisy environments.

Users will appreciate the ergonomic design of the PRO-91, which features intuitive controls and a backlit LCD display for easy visibility, even in low-light conditions. The keypad layout is designed for straightforward operation, allowing even novice users to navigate through menus and settings with ease.

The PRO-91 is powered by a rechargeable battery, offering extended usage without the need for constant battery replacements. Its compact and lightweight construction makes it portable, making it suitable for on-the-go monitoring.

In conclusion, the Radio Shack PRO-91 offers an impressive array of features, technologies, and characteristics that cater to diverse scanning needs. With its wide frequency range, programmable channels, and superior audio quality, it stands out as a reliable choice for anyone looking to explore the world of radio communication. Whether for recreational use or professional monitoring, the PRO-91 ensures users remain connected to the signals that matter most.