Radio Shack PRO-95 owner manual Motxxxxxx or Edxxxx, Delay Function in ID Indication Mode

Page 66

Trunking

Ô NOTE Ô

When activated, ID delay watches the control channel command for the delay time when the signal disappears from the voice channel.

3.	Press FUNC,		or	to
	move to the desired bank.
4.	Press	or	to select the
	ID memory.

5.Press L/OUT to lock out the ID. L appears.

6.To remove the lockout from a trunking ID, manually select

the ID memory, and press L/OUT until L disappears.

You can confirm the ID code while the scanner shows the text when the received signal is a voice channel.

1.Press TEXT while the scanner is receiving the voice channel and indicating the text name. The ID code appears as

MOT:XXXXXX or ED:XXXX.

2.Press TEXT again to cancel.

DELAY FUNCTION IN ID INDICATION MODE

You can set the ID delay function separate from the channel delay.

1.Press FUNC then ./DELAY

while you are programming the trunked ID. Use Up/Down

keys to set ID delay. 2.0 seconds

appears.

2. Press or to select None,

0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5 or

4.0 seconds.

3.Press ENTER. Ô

66

Image 66

Contents PRO-95 Dual Trunk-Tracking Handheld Scanner Features Your scanner includes these features Simultaneous TrunkingAutomatic Channel Reviewing Locked Features Vehicle using a DC adapter not supplied FCC Wants YOU to KnowScanning Legally FCC Wants You to Know Using Vehicle Battery Power on Page 12 Ô Using BatteriesPower Sources PreparationPull the battery holder out of the battery compartment Using AC Power Until Low BatteryCharging Rechargeable Batteries Using Vehicle Battery Power Connecting AntennaConnecting an Optional Antenna Connecting AN EARPHONE/HEADPHONESListening Safely Traffic Safety Connecting AN Extension SpeakerUsing the Belt Clip About Your ScannerTransferring Data to From Another Scanner or a PC About Keypad Mode changes the receive mode AM, FM, MOT, ED TUV enters an 8, or inputs characters T, U, or CL clears an incorrect entryChannel Storage Banks Quick StartUnderstanding Banks Preprogrammed Search BanksUnderstanding Your Scanners Modes Search BanksAM Mode Motorola ModeUnderstanding Your Scanners Modes Edacs Mode FFF=Fleet ID SS=Subfleet IDOr using an outdoor antenna to improve reception Open and Closed Modes Turning on Scanner and Setting Squelch OperationStoring Known Frequencies Into Channels Operation Storing Trunking Frequencies Into Channels Invalid Freq brieflyAssigning a Text Tag to a Channel Storing Text TagsAssigning a Text Tag to a Group ID Assigning a Text Tag to a Bank Press CharacterFinding and Storing Active Frequencies Searching a Preprogrammed Frequency Range# @ + Bank BandOperation Band Charts Search bank SR0 Marine band Receive mode FMChannel Frequency MHz Search bank SR1 CB band Receive mode AM Search bank SR2 Police/Fire band Receive Mode FM Group Frequency MHz Step KHzSearch bank SR3 Aircraft Receive mode AM Search bank SR4 Ham band Receive mode FMFrequency MHz Step KHz 108.000-136.9875 Finds an active frequency, it stops searching. Ô ** Paused Manually Tuning a FrequencyListening to Weather Band Air and Limit search bandsDisplaying Weather Messages Digitally-encoded Same signal when an alert is broadcast,Listening to a Weather Channel Weather information on one or more of these channelsCopying a Frequency into a Specified Channel Using Frequency CopyWX Alert and Beep Tone Confirmation DIG WX Stby appearsSecond, the frequency to be copied flashes Copying a Frequency into the Priority Channel Scanning ChannelsDeleting Frequencies from Channels Turning Channel-Storage Banks Off and OnLocking Out Channels Special FeaturesUsing the Delay Function Locking OUT Channels or FrequenciesReviewing the Lock-Out Channels Locking Out FrequenciesReviewing Locked-Out Frequencies Clearing All Locked-Out Frequencies in a Search Bank Press any key other than 1 to cancel clear. ÔClearing a Locked-Out Frequency Lockout list appearsManual again Changing the Receive Mode To turn off the priority feature, press PRIUsing the Attenuator Might have to change the receive modeUsing the Display Backlight Turning the KEY Tone on and OFFPress Func and then ATT to set Press or to select 3 Using the Keylock10 or 20 seconds then press Use Up/Down keys to set Lit off time 5 seconds appearsChanging the Display Contrast Down keys to set contrast. appearsCloning Programmed Data Trunking Trunking OperationUnderstanding Trunking Way radio users transmission on a control channel Setting Squelch for the Trunking ModeProgramming Trunking Frequencies Follow these steps to program trunked frequenciesTrunked. Press Press Trunk to enter the ID program modePress PGM to enter the program mode Press PGM and press or hold Down or to select the bank. ÔProgramming Motorola Trunking P001~Bank Press Mode and select MOT 50.0 or 12.5 kHz, then pressProgramming Fleet Maps Down keys to set 800MHz base. Normal appearsNormal or Offset and press Press or to selectBlock 0 size code. Use 15 for type II. S-00 appears Block Size CodeTalk Group IDS Storing Talk GroupEnter the correct size code. Ô Press Scan to start scanning Memory full MOTMOT none Desired bankDupl ID ID NoInvalid ID. appears Talk Group ID HoldTo release ID hold, press Scan or Turning AN ID SUB- Bank on or OFFLocking OUT Talk Group IDS Press PGM. Ô Press TrunkMotxxxxxx or Edxxxx Delay Function in ID Indication ModeKeys to set ID delay .0 seconds 1.0, 1.5, 2.0, 2.5, 3.0, 3.5 or SecondsClearing ALL Talk Group IDS in ONE Bank Reviewing LOCKED-OUT Talk Group IDSClearing Talk Group Any locked out IDs in a bankChanging OPEN/CLOSED Mode Or vice versa Repeat Steps 2 and 3 for each bankHAM Radio Frequencies General Guide to FrequenciesUS Weather Frequencies Birdie FrequenciesVHF Low Band MHz UHF Low Band MHzVHF High Band MHz UHF High Band MHzHF Band Guide to the Action BandsTypical Band Usage VHF BandUHF Band VHF BandUHF Band Abbreviation ServiceBand Allocation Frequencies MHzFire MHz-300 MHz MHz-30 MHzCB Band 26.965-27.405 MHz Meter Amateur Band 28.0-29.7 MHz VHF Low Band MHz-in 5 kHz stepsGovernment Band Meter Amateur Band 50-54 MHzAircraft Band 108-136 MHz 137-144 MHzIND, MOV Centimeter Amateur Band 420-450 MHz Ultra High Frequency UHF 300 MHz-3 GHzGovernment Band 406-420 MHz Low Band 450-470 MHzPublic Safety Band Locally Assigned in 6.25 kHz steps Trunked Systems Band Locally Assigned 6.25 kHz stepsCentimeter Amateur Band MHz in 6.25 kHz steps General Trunked Band in 6.25 kHz steps Frequency ConversionPrivate Trunked Band in 6.25 kHz steps Centimeter Amateur Band KHz stepsFrequency Conversion Troubleshooting Problem Possible Cause RemedyInitializing Scanner RESETTING/ Initializing the ScannerResetting the Scanner Bottom lineSpecifications CareFrequency Coverage MHz ID memory banks Intermediate Frequencies if 1st 380.8 MHz MHz Antenna Parts AccessoriesExternal Antenna RG-8/RG-58 50-Ohm Coaxial CablePC Interface Cable Connecting CableTo AC power 9V, 300 mA AC AdapterPage Page Page Limited One-Year Warranty RadioShack CorporationFort Worth, Texas