Xilinx ML506, ML505 quick start Verify Factory Default Settings

Verify Factory Default Settings

•Set the Ethernet PHY jumpers, J22, J23 to positions 1-2 (1)

•Insert the Factory CompactFlash into the ML505 board (2)

•Set the Front DIP switches (SW3) to 00010101 (1 = ON) (3)

•Set the Rear DIP switches (SW6) to 11001010 (4)

•Power-up the ML505 board

2

1

4

3

Note: Presentation applies to the ML505 and ML506