Radio Shack PRO-79 owner manual Scanning the Stored Channels

Page 32

2.Press MON/CL. M, a monitor memory number, and CH flash, and the frequency in the selected monitor memory appears.

3.Enter the desired monitor memory’s number (1–20), then press MON/CL again. The selected monitor memory’s fre- quency appears.

4.Press ENT. The scanner stores the frequency in the selected channel.

5.To move another monitor memory frequency to the next channel, press PGM and repeat Steps 2–4.

SCANNING THE STORED CHANNELS

To set the scanner to continuously scan through all channels with stored frequencies, simply press SCAN. SCAN and ▲ ap- pear, and the scanner begins to rapidly scan until it finds an ac- tive frequency.

When the scanner finds an active frequency, it stops and dis- plays that channel and frequency number, then it automatically begins scanning again when the transmission on that frequency ends.

Notes:

•To reverse the scanning direction, press ▲ or ▼.

•To set the scanner to remain on the current channel for 2 seconds after the transmission ends, see “Delay” on Page 36.

•To set the scanner to remain on the current channel, even after the transmission stops, press MAN at any time during the transmission so MAN appears and SCAN disappears (see “Monitoring a Stored Channel” on Page 33).

•To lock out channels so the scanner does not stop for a transmission on those channels, see “Locking Out Channels or Frequencies” on Page 36.

32

Image 32

Contents PRO-79 Channel VHF/Air/UHF Handheld Scanner Features Page FCC Notice Frequency Types of Transmissions Range MHzScanning Legally Contents Special Features Installing Batteries PreparationUsing AC Power Using Vehicle Battery PowerCharging Rechargeable Batteries Connecting AN Antenna Connecting the Supplied AntennaConnecting an Outdoor Antenna Connecting AN Earphone Headphones Listening SafelyConnecting AN Extension Speaker Traffic SafetyUnderstanding Your Scanner Look AT the KeypadNumber KeysLook AT the Display AIRDLY Understanding Banks Channel Storage BanksService Banks Fire/PoliceMarine AirAmateur Radio Channel Frequency MHz 156.9250 Monitor Memories RESETTING/INITIALIZING the Scanner OperationResetting the Scanner Initializing the ScannerStoring Known Frequencies Into Channels Searching the Service Banks Finding and Storing Active Frequencies Using Direct Search Page Moving a Frequency from a Monitor Memory to a Channel Using Monitor MemoryListening to a Monitor Memory Scanning the Stored Channels Turning CHANNEL-STORAGE Banks OFF and on Monitoring a Stored ChannelListening to the Weather Band Clearing a Stored ChannelListening to the Marine Bank WX Alert Special Features DelayLocking OUT Channels or Frequencies Locking Out ChannelsRemoving Lockouts From All Frequencies Locking Out FrequenciesReviewing Locked-Out Frequencies Using Priority Removing Lockouts From All Frequencies in All Service BanksTurning the KEY Tone on and OFF Using the Display BacklightUsing the KEY Lock Avoiding Image Frequencies General Guide to Scanning Guide to FrequenciesNational Weather Frequencies Birdie FrequenciesPrimary Usage Guide to the Action BandsTypical Band Usage MHz Abbreviations Services Band AllocationMeter Amateur Band 50-54 MHz Aircraft Band 108-136 MHzGovernment Band 137-144 MHz Meter Amateur Band 144-148 MHzVHF High Band 148-174 MHz Centimeter Amateur Band 420-450 MHzFrequency Conversion Low Band 450-470 MHzTroubleshooting Squelch is notCare and Maintenance Specifications Volts DC, 4 AA Batteries Page Fort Worth, Texas RadioShackDivision of Tandy Corporation

Related manuals

Manual 52 pages 9.5 Kb