Radio Shack 20-164 manual Saving Trunking Channels, To delete a Talk Group ID

To delete a Talk Group ID:

1.Press PGM then TRUNK.

2.Press FUNC,  or  to select ID memory.

3.Press FUNC then CL.

To delete ALL talk group IDs in a bank:

1.Press PGM.

2.Press TRUNK to enter a Talk Group ID memory mode.

3.Select a Talk Group ID bank using FUNC,  or .

4.Press FUNC then 6. “Clear entire list? Press 1 to clear all, any other key aborts” appears.

5.To clear the Talk Group IDs, Press 1. To cancel the deletion, press any key except 1.

Saving Trunking Channels

Trunking channels are defined using the same procedure for non-trunking channels. In each bank, you can mix channel modes, including conventional, but you can scan only one trunking mode at a time, either EDACS, Motorola, or LTR.

Because Motorola control frequencies change daily, you should save all the control frequencies in the same bank. If you do not know the control frequency, save all the Motorola frequencies in the same bank.

EDACS frequencies are assigned Logical Channel Numbers (LCN) and organized in a specific order. To scan correctly, you must program the frequencies in LCN order, starting with Memory 01.

T

I c y e

T s c

F t f

I

T



40