Honeywell HCE 60 manual Help with problems, Problem Cause/Solution

Page 48

Appendix

Help with problems

Problem

Cause/Solution

LED does not

Mains voltage not connected.

illuminate when power

► Check voltage of electrical outlet.

plug is plugged in.

► Check fuse at storey controller.

LEDs 1 through 8 of

The setpoint adjuster cannot be assigned.

the zones do not

► Check whether batteries in setpoint ad-

illuminate red continu-

juster are inserted properly.

ously during start-up.

► Check wireless connection.

LEDs 1 through 8 of

The room name cannot be assigned.

the zones do not

► Check whether Hometronic Manager is

illuminate green con-

installed.

tinuously during start-

► Check whether or not a room name is

up.

assigned to zone.

 

 

► Reassign zone if applicable.

Not all rooms are

► Check heating and inlet temperature.

warmed/cooled.

► Check adaptation to thermal actuator (see

 

Page 15).

 

► Check fuse of storey controller.

 

If fuse is defective:

 

► Check actuators for short circuit.

 

 

46

Page 47 Page 49
Image 48
Page 47 Page 49
Contents Installation and Operation HCEPage Contents Contents Overview ApplicationFor your information Installation procedure InstallationConfiguration and electrical connection Classifying zones and actuatorsDetermining temperature zones Creating a zoning planTurers Filling out zoning plan Example of zone divisions Page Actuator Setpoint ad Room name at Zone Type, location HCMInstallation Wall installation Dimensions of storey controller in mmDIN rail installation Installing Hometronic componentsConfiguration and electrical connection Damage to exposed componentsOpening housing Plugging in the expansion module optionalSetting actuator Switch Actuator type Property Position Cabling connectionsPermissible cable types and lengths Cable designation Max. permisConnector 1 to Connecting actuators Transformer lie open while the device is beingDiagonal cutter Connecting setpoint adjuster HCW Connecting boiler regression and pump relay Boiler feedback Connections of storey controller and pump relay Inserting connectors Installing antenna Closing housing of storey controllerStarting up setpoint adjuster HCW Start-upPreparing for start-up Starting up setpoint adjuster HCU Starting up room temperature sensor HCFStarting up storey controller LED indicators on storey controller Normal mode Fault modeInstallation mode Operating modes of storey controllerButtons Cooling functionActivating cooling function Example Assigning an HCW 22 setpoint adjuster to zone Assigning zones and issuing room namesLED of the selected zone lights continuously red Example Assigning room name Living to zone Following text is displayedAn * appears after Living Assigning zones and issuing room names Assigning setpoint adjusters of type HCW 23 to a zone Assigning 2 room names to a temperature zoneAssigning room names for cooling function Canceling assignment LED of zone 1 flashes green/orangeDeleting assignment of a room name at the Hometronic Manager Saving settings on Hometronic Manager Checking configurationChecking wireless transmission Displaying faults Checking assignment of room namesClosing setpoint adjuster Completing start-upHanding over zoning plan Resetting storey controller to state of delivery Appendix GlossaryHelp with problems Problem Cause/SolutionIssuing room names on Appendix Overview of Hometronic heating components Zoning plan Distribution limitation Page Page Honeywell AG Böblinger Straße 71101 Schönaich Tel

HCE 60 specifications

The Honeywell HCE 60 is a versatile and efficient heating solution designed to meet various indoor heating needs. Ideal for both residential and commercial applications, the HCE 60 features advanced technology that ensures optimal performance while prioritizing energy efficiency.

One of the standout features of the Honeywell HCE 60 is its adjustable thermostat. Users can select their desired temperature with precision, allowing for personalized comfort levels. The built-in safety features, including overheat protection and a tip-over switch, enhance its reliability, making it a safe choice for use in households with children or pets.

Equipped with powerful heating capabilities, the HCE 60 boasts a robust heating element that provides rapid warmth to any space. Its fan-assisted heating mechanism ensures that warmth is distributed evenly throughout the room, eliminating cold spots and maintaining a comfortable environment. The unit operates quietly, making it suitable for use in bedrooms, offices, or any area where noise could be a distraction.

The compact and portable design of the HCE 60 is another notable characteristic. With a lightweight construction and integrated handles, the heater can be easily moved from one room to another, allowing users to enjoy their preferred temperature wherever they are. The sleek appearance also blends seamlessly with various interior decors, making it an aesthetically pleasing addition to any space.

For accessibility, the HCE 60 includes a user-friendly control panel. The intuitive layout allows for easy operation, ensuring that users can effortlessly adjust settings as needed. Additionally, it features multiple heat settings, enabling users to choose between high, low, or eco modes based on their current heating requirements and energy-saving preferences.

Overall, the Honeywell HCE 60 combines safety, convenience, and performance in a single package. Its advanced features and technologies make it a top choice for anyone seeking an efficient and effective heating solution that delivers comfort without compromising on safety. Whether you need additional warmth during chilly months or are looking to maintain a consistent temperature in larger spaces, the HCE 60 stands out as a premier option in the world of portable heaters.
Top Page Image Contents