Honeywell Dolphin 6100, 6100 Mobile Computer quick start Resetting the Device, Charge the Batteries

Step 2: Charge the Batteries

Dolphin terminals ship with both the main battery pack and internal backup battery significantly discharged of power. Charge the main battery pack with the Dolphin charging cable for a minimum of 4 or 6 hours depending on your battery before initial use.

1

2

3

!of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty.We recommend use of Honeywell peripherals, power cables, and power adapters. Use

Step 3: Boot the Terminal

The terminal begins booting as soon as power is applied and runs by itself. Do NOT press any keys or interrupt the boot process.

When the boot process is complete, the Desktop appears and the terminal is ready for use.

Resetting the Device

Soft Reset:	Using the stylus press and release the Reset button.
	This resets RAM and reloads the OS.
Hard Reset:	Using the stylus press and hold the Reset button and
	then press and release the Power button. This resets
	RAM, reloads the OS, and resets the Real Time Clock.

4