Honeywell C6097A specifications Wiring, Settings and Adjustments, Pressure Setpoint Adjustment

C6097A,B PRESSURE SWITCHES

WIRING

WARNING

Electrical Shock Hazard.

Can cause serious personal injury or death.

Disconnect power supply before beginning installation.

More than one disconnection can be involved.

Make sure that all wiring agrees with all applicable local codes, ordinances and regulations. An opening is provided to accommodate rigid conduit or armored cable for line voltage operation (see Fig. 3 and 4). Do not overload the switch contacts (see Switch Ratings in the Specifications section). The switching schematic is shown in Fig. 5.

Fig. 3. C6097 (manual reset switch model) with cover removed.

Fig. 4. C6097 (recycle model) with cover removed.

SETTINGS AND ADJUSTMENTS

Pressure Setpoint Adjustment

To adjust the pressure setting, turn the setpoint adjustment

dial (Fig. 3, 4 and 5) clockwise to increase the

pressure setting and counterclockwise to decrease the pressure setting.

NO

2

NC

1

C

1C6097A BREAKS C-NO, MAKES C-NC ON PRESSURE FALL. MANUAL RESET MODELS LOCK OUT.

2C6097B BREAKS C-NC, MAKES C-NO ON

PRESSURE RISE AND LOCKS OUT. M17123

Fig. 5. C6097 schematic.

5 65-0237—1