Specifications, Audio, Power | Cable Electronics AV501 HDX specification

VIDEO

AUDIO	Source

HD DVD, SAT. RECEIVER, etc.
IN	OUT

INOUT

AV501 HDX

The AV501HDX has one set of inputs and five sets of outputs (Output #5 is designated as the loop output, but may be used to drive a monitor directly). The unit allows any Audio/Video source, with Y, Cb, Cr, or Y, Pb, Pr Outputs (component), to distribute Audio and Video to five different locations without any signal loss. The amplifier also supports composite video and digital audio.

Note: the loop output may be used to daisy chain several units together as is typically done in store displays.

SPECIFICATIONS

Monitor 1
Monitor 1	Monitor 2	Monitor 3

VIDEO (All Channels including Component and Composite)

Nominal Input level:	1	Volt peak to peak
Gain:	1	Volt into 75 ohms (2 Volts Unterminated)
Input Impedance:	75 ohms
Output Impedance:	75 ohms
Isolation port to port:	32 dB
Isolation output to input:	60 dB
Return loss:	>18 dB
Video bandwidth:	150 MHz

Installation / Operation Instructions

Unpack the amplifier and power supply from the box. Place the amplifier in a dry location, usually behind the shelf where the monitors are located.

The unit has integrated mounting brackets that are pre-drilled in case the user wishes to screw the unit to the shelf (screws supplied by user).

Connect the source device outputs to the appropriate input jacks on the AV501HDX. Connect cabling from the AV501HDX outputs to the desired display or recording device. The loop output may be used as normal or connect to the next distribution amplifier to create more

AUDIO

Analog:

Nominal Input level: Gain:

Input impedance: Output impedance: THD:

Frequency Response: Channel Separation: Port to Port Isolation: Out to Input Isolation: Signal to Noise:

1 Volt peak to peak Unity (one to one)

22k ohm

1k ohm <0.05%

20Hz to 100kHz >75dB

60dB

>100dB @ 2 Volts out

outputs.

Insert the power supply connector into the power jack of the AV501HDX. Plug the wall transformer into a 120Vac outlet. The power LED should be on and the unit is ready to use.

Digital:

Supports Standard SPDIF digital audio.

Unity gain when terminated into 75 ohms (2X gain, high impedance.). Greater than 50 MHz of bandwidth to ensure minimal degradation.

POWER

Requirement: External 9 or 10 Volt AC @ 1000mA with a ( 2.1mm center diameter) Coaxial connector. Power Supply is included.

AV501 HDX specifications

The Cable Electronics AV501 HDX is a cutting-edge multimedia streaming device designed to elevate home entertainment experiences by delivering high-definition video and audio playback. This innovative device represents a fusion of modern technology and user-friendly design, making it an ideal addition to any home theater setup.

One of the primary features of the AV501 HDX is its support for 4K Ultra HD resolution, allowing users to enjoy stunning picture clarity and vibrant colors that bring content to life. This high-resolution capability is complemented by advanced HDR (High Dynamic Range) technology, which enhances contrast and expands the color palette to deliver dynamic visuals. Whether viewing movies, playing games, or streaming content, users can expect an immersive experience that rivals that of professional studios.

Audio quality is equally important, and the AV501 HDX excels in this area with support for multiple advanced audio formats, including Dolby Atmos and DTS:X. These technologies create a three-dimensional sound experience that envelops viewers, transporting them deeper into their favorite media. The device is also equipped with high-fidelity DACs (Digital to Analog Converters) that ensure crystal-clear sound reproduction for all audio sources.

Connectivity options on the AV501 HDX are robust and user-friendly. Featuring HDMI 2.1 ports, users can easily connect multiple devices, such as gaming consoles, Blu-ray players, and sound systems, ensuring a seamless and clutter-free setup. Additionally, the device supports Wi-Fi 6 for faster and more reliable wireless streaming, alongside Ethernet connectivity for stable and consistent internet access.

User interface and experience are a significant focus for the AV501 HDX. The device comes with an intuitive remote control featuring quick access buttons to popular streaming services such as Netflix, Hulu, and Amazon Prime Video. The interface is designed to make navigating through content easy and enjoyable, allowing users to find their favorite shows and movies without hassle.

Moreover, the AV501 HDX integrates smart home capabilities, enabling compatibility with virtual assistants like Amazon Alexa and Google Assistant. Users can control the device through voice commands, enhancing convenience and providing a hands-free experience.

Overall, the Cable Electronics AV501 HDX combines impressive video and audio technologies with a user-friendly interface and extensive connectivity options. It is a versatile and powerful device that caters to the needs of modern home entertainment enthusiasts, ensuring that every viewing session is an unforgettable experience. Whether for streaming, gaming, or music playback, the AV501 HDX truly stands out as a premier choice for anyone looking to upgrade their digital entertainment setup.