Samsung RF263BEAESR, RF263BEAEWW, RF263BEAEBC Changing The Water Filter, Touch the “Ice Type/Water

( 8 ) Filter Water filter usage

This icon will light up when you need to

change the filter. After you use about

300 gallons of water, the filter indicator

lights up. (about 6 months). After you

install the new water filter, reset the filter

indicator by touching the Ice Type Water/

Hold 3 sec for Filter Reset button.

t If water is not dispensing or

dispensing slowly, you need to

replace the water filter because

the water filter is clogged.

t Some areas have large amounts

of lime in their water, which

causes the water filter to clog

more quickly.

Cooling Off
Mode	mode), is designed for use by retailers
	when they are displaying refrigerators on

refrigerator’s fan motor and lights work normally, but the compressor does not run, and the refrigerator and freezer do

touch and hold the Energy Saver button and the Freezer button for 5 seconds during normal operation. The refrigerator chime sounds and the temperature display flashes OF OF.

hold the Energy Saver and the Freezer buttons again for 5 seconds.

CHANGING THE WATER FILTER

To reduce risk of water damage to your

WARNING property DO NOT use generic brands of water filters in your SAMSUNG

Refrigerator.

USE ONLY SAMSUNG BRAND WATER FILTERS. SAMSUNG will not be legally responsible for any damage, including, but not limited to property damage caused by water leakage from the use of a generic water filter. SAMSUNG Refrigerators are designed to work ONLY WITH SAMSUNG Water Filter.

The Filter light turns red to let you

know when it is time to change your water filter cartridge.

To give you time to get a new filter, the red light comes on just before the

	2
	1
t To change the water filter more easily,
t Sometimes, it is hard to disassemble the water		02
filter because impurities in the water cause it	2	OPERATING
water filter, a little
to stick. If you are having difficulties, grip the
water filter firmly and pull it hard.
t When you pull the
water can leak from
the opening. This is	3
normal. To minimize
the water leaks, keep
the filter cartridge horizontal when you pull it.

tTo prevent overflow, empty the water filter tray

	( 3 ) and dry around the filter case ( 2 ).
3.	Insert the new filter into the filter case ( 4 ).
4.	Push the filter, and then turn it clockwise until it
	locks.
	t If you have trouble inserting the water
	filter because of high water pressure,

tThe locked symbol should be lined up with the indicator line.

4

5.Touch the “Ice Type/Water

Hold 3 sec for Filter Reset”

button ( ) for

(Filter Reset)

about 3 seconds to reset the water filter. The color of

of the indicator ( ) changes from

6.

on.

capacity of the current filter runs out.

(Red)

Changing the filter on time provides you with the freshest, cleanest water from your refrigerator.

1.

filter ( 1 ) about 1/4 turn, counter-clockwise.

2. Pull the water filter ( 1 ) from the case filter ( 2 ).

For a replacement water filter, you can visit your local home Improvement center or contact the Samsung Parts distributor. Be sure the replacement water filter has the SAMSUNG logo on the box and

on the water filter. Link : http://www. samsungparts.com

operating _17

DA68-02601A(EN+FR+ES)-0.2.indb 13

2012.3.31 9:49:46 AM